[sccm 2012] SCCM 2012SP1 + Multicast

[mrbios]

I'm struggling to get this working at the moment, I only recently installed the premium license on my HP 8206zl so that i could enable PIM-DM and as far as I'm aware by following this document: http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02610033/c02610033.pdf I've got all the required boxes ticked from a networking point of view.

 

I've enabled multicast on my DP and a test OS image, I'm using the VMXNET3 network driver on my SCCM VM (as per the fix to a lot of people having issues with this) but when i try to start a session (of which i have set to specifically only allow it to work over multicast while i test it) I get an erro 0x80091007 which suggests a hash check issue.

 

I've followed some of the attempts to fix this here: Henk's blog: Multicast error 0x80091007 during deployment but to no avail, as it does seem I'm having the EXACT same issue.

 

Now I'm not sure if my router is setup right so first of all here's the running config:

Running configuration:

 

; J9477A Configuration Editor; Created on release #K.15.04.0007

; Ver #01:00:01

 

hostname "ProCurve Switch 8206zl"

max-vlans 32

time daylight-time-rule Western-Europe

module 1 type J8705A

module 2 type J8705A

trunk A21-A24 Trk1 Trunk

trunk B21 Trk3 Trunk

trunk B17,B19 Trk5 Trunk

trunk B18,B20 Trk6 Trunk

ip default-gateway 172.18.66.253

ip routing

vlan 1

name "IP_BACKBONE"

forbid A2

ip address 172.18.64.251 255.255.255.0

no untagged A1-A20,B1-B16,B22-B24,Trk1,Trk3,Trk5-Trk6

exit

vlan 4

name "INFRASTRUCT"

forbid A2

untagged A1,A12,A14,A17-A19,B1-B2,B5-B9,B13-B16

ip address 172.18.66.1 255.255.255.0

tagged B22,Trk1

ip igmp

exit

vlan 2

name "B_BLOCK"

forbid A2

untagged B24

ip address 172.18.76.1 255.255.255.0

tagged B1-B2,B8-B9,B13-B16

ip igmp

exit

vlan 3

name "A_BLOCK"

forbid A2

untagged A5-A10,A13,B10

ip address 172.18.68.1 255.255.255.0

tagged B1-B2,B8-B9,B13-B16

ip igmp

exit

vlan 5

name "ICT"

forbid A2

untagged A11

ip address 172.18.65.1 255.255.255.0

tagged B1-B2,B8-B9,B13-B16

ip igmp

exit

vlan 6

name "iSCSI0"

forbid A2

ip address 172.18.67.1 255.255.255.0

tagged Trk1

exit

vlan 7

name "MEDIA_CENTRE"

forbid A2

untagged Trk3

ip address 172.18.70.1 255.255.255.0

tagged A11,B1-B2,B8-B9,B13-B16

ip igmp

exit

vlan 8

name "VIDEO"

forbid A2

untagged A20

ip address 172.18.79.1 255.255.255.0

tagged A5-A9,A11,B22-B24,Trk1,Trk3

ip igmp

exit

vlan 9

name "iSCSI2"

forbid A2

untagged A15,Trk5

ip address 172.18.69.1 255.255.255.0

tagged Trk1

exit

vlan 11

name "D_BLOCK"

forbid A2

untagged B23

ip address 172.18.74.1 255.255.255.0

tagged B1-B2,B8-B9,B13-B16

ip igmp

exit

vlan 12

name "PRINT"

forbid A2

ip address 172.18.71.1 255.255.255.0

tagged A5-A9,B13-B16,B22-B24,Trk1,Trk3

exit

vlan 14

name "WIRELESS"

forbid A2

untagged A4

ip address 172.18.77.1 255.255.255.0

tagged A5-A11,B1-B2,B8-B9,B13-B16,B22-B24,Trk1,Trk3

exit

vlan 10

name "F_BLOCK"

forbid A2

untagged B22

ip address 172.18.72.1 255.255.255.0

tagged B1-B2,B8-B9,B13-B16

ip igmp

exit

vlan 15

name "iSCSI1"

forbid A2

ip address 172.18.78.1 255.255.255.0

tagged B13-B16

exit

vlan 16

name "iSCSI3"

forbid A2

untagged A16,Trk6

ip address 172.18.73.1 255.255.255.0

tagged B13-B16,Trk1

exit

vlan 17

name "DOOR_SYSTEM"

forbid A2

ip address 172.18.75.1 255.255.255.0

tagged A8-A9,A11,B1-B2,B8-B9,B13-B16,B22-B24,Trk1,Trk3

exit

vlan 18

name "TBlock"

forbid A2

untagged Trk1

ip address 172.18.80.1 255.255.255.0

tagged B1-B2,B8-B9,B13-B16

ip igmp

exit

vlan 19

name "iLO"

forbid A2

ip address 172.18.81.1 255.255.255.0

exit

vlan 20

name "DMZ"

forbid A1,A3-A20,B3-B7,B10-B12,B22-B24,Trk3,Trk5-Trk6

untagged A2

tagged B1-B2,B8-B9,B13-B16,Trk1

no ip address

exit

vlan 21

name "vMotion"

forbid A2

untagged B3-B4,B11-B12

ip address 172.18.84.1 255.255.255.0

exit

vlan 22

name "GUEST_WIRELESS"

forbid A2

untagged A3

tagged A4-A11,B1-B2,B8-B9,B13-B16,B22-B24,Trk1,Trk3

no ip address

exit

igmp-proxy-domain "WDS" 172.18.66.1 224.0.1.0 239.255.255.255

igmp-proxy-domain "Video" 172.18.79.1 239.192.79.10 239.192.79.10

power-over-ethernet pre-std-detect

timesync sntp

sntp unicast

sntp server priority 1 172.18.66.25

ip route 10.7.116.0 255.255.252.0 172.18.66.12

ip route 192.168.11.2 255.255.255.255 172.18.66.253

ip route 195.137.89.208 255.255.255.252 172.18.66.253

ip route 213.18.249.18 255.255.255.255 172.18.66.12

ip route 213.129.90.244 255.255.255.255 172.18.66.12

ip multicast-routing

router pim

exit

interface A21

flow-control

exit

interface A22

flow-control

exit

interface A23

flow-control

exit

interface A24

flow-control

exit

snmp-server community "public" unrestricted

snmp-server host 172.18.66.16 community "public"

snmp-server host 172.18.66.22 community "public"

snmp-server host 172.18.75.3 community "public"

snmp-server host 169.254.101.158 community "public"

snmp-server host 172.18.66.26 community "public"

snmp-server location "A Block Server Room"

spanning-tree Trk1 priority 4

spanning-tree Trk3 priority 4

spanning-tree Trk5 priority 4

spanning-tree Trk6 priority 4

vlan 2

ip pim-dense

ip-addr any

exit

exit

vlan 3

ip pim-dense

ip-addr any

exit

exit

vlan 4

ip pim-dense

ip-addr any

exit

igmp-proxy "WDS"

exit

vlan 5

ip pim-dense

ip-addr any

exit

igmp-proxy "WDS"

exit

vlan 7

ip pim-dense

ip-addr any

exit

exit

vlan 10

ip pim-dense

ip-addr any

exit

igmp-proxy "WDS"

exit

vlan 11

ip pim-dense

ip-addr any

exit

exit

vlan 18

ip pim-dense

ip-addr any

exit

exit

password manager

 

Are there any issues with my PIM or IGMP setups there? I'm assuming it's a network issue rather than an SCCM issue at the moment because I've only just setup PIM so it's untested.

 

Also the vlan my SCCM server is in is vlan 4, the vlan my 2 test clients (which are running in vmware workstation 9) are in vlan 5

Edited August 8, 2013 by mrbios

[deano]

I had the same issue as you and could not find a solution. Ended up streaming the image instead of autocasting or multicasting

[adamf]

Same issue here... Config looks good, mine is almost identical (I'm using a 5406zl). You can test whether the network is configured for multicast using the multicast hammer tool from Nortel

 

Out of interest.... What size is your image and do you have any CUs installed?

[mrbios]

Same issue here... Config looks good, mine is almost identical (I'm using a 5406zl). You can test whether the network is configured for multicast using the multicast hammer tool from Nortel

 

Out of interest.... What size is your image and do you have any CUs installed?

 

Just shy of 4GB, I've not installed any CUs since installing SP1 as far as i can remember.

[free780]

Do you have the installer for network hammer, I'd like to test our network. Can't seem to find a download anywhere.

[adamf]

Here is a link to a folder on our Skydrive where I've just uploaded it: http://sdrv.ms/1d3iO9v

 

mchammer_installer_for_windows_and_user_guide.zip