TechSupp Posted September 3, 2007 Posted September 3, 2007 After having no problems before with Toshiba laptops and sending the video signal to a projector, I have now got problems!!! I have a Toshiba L100 but I can't for the life of me get the image to display on the smartboard through the projector. When I press FN+F5 the screen blips but no image appears. I checked display properties and set the screens to primary and secondary (did notice that the icons denoting primary and secondary have changed from icons to numbers now?) but still no joy. Have rebooted the laptop, pwered off and on the projector but still no joy. Any ideas anyone. Do remember someone else having problems before on here, how or did you solve it?
OutToLunch Posted September 3, 2007 Posted September 3, 2007 Have you tried connecting it up to a monitor instead of a projector to double check there's no problem? I seem to remember with some of our Toshiba's the hot key combination seems to do naff all and you have to go through the systray control for the display instead... Not sure which models it was though...
_Bat_ Posted September 3, 2007 Posted September 3, 2007 I seem to remember with some of our Toshiba's the hot key combination seems to do naff all and you have to go through the systray control for the display instead... Not sure which models it was though... I have also had this problem.
TechSupp Posted September 3, 2007 Author Posted September 3, 2007 Just tried it with an LCD and a CRT monitor and no image is displayed Any more ideas how to get it to send the video signal to the external screen?
ConTheITGuy Posted September 3, 2007 Posted September 3, 2007 It is generally the whole display is it, and not just a DVD? This is a common issue. Andy
kearton Posted September 3, 2007 Posted September 3, 2007 What resolution and frequency are you running the primary display at?
TechSupp Posted September 3, 2007 Author Posted September 3, 2007 From memory the primary display was running at 100Hz and at 1024x768. Tried it at 800x600 and made no difference. Yes, its with the whole display, not just a part of it i.e. playing a DVD, just can't get any image at all. LCD screen recognised that the video cable was plugged in but then gave 'no signal' no matter what I tried.
bishopsgarthstockton Posted September 3, 2007 Posted September 3, 2007 Have you updated the video drivers?
TechSupp Posted September 3, 2007 Author Posted September 3, 2007 Will download them and try again. Just had a look at the Toshiba site and the date of the display driver on there is a good few months before we bought them but I'll check the driver version next time I'm in. They are ATI drivers, do I have to use the toshiba supplied drivers or shpuld I go and find some later ATI drivers?
crc-ict Posted September 3, 2007 Posted September 3, 2007 Try reducing the refresh rate - 100Hz sounds a bit high, especially for a projector. Most TFT's and Projectors seem to like 70 or 75Hz. Might be worth a try.
kearton Posted September 3, 2007 Posted September 3, 2007 From memory the primary display was running at 100Hz and at 1024x768. Tried it at 800x600 and made no difference. I'd try dropping the Hz. 100 is quite high
crc-ict Posted September 3, 2007 Posted September 3, 2007 From memory the primary display was running at 100Hz and at 1024x768. Tried it at 800x600 and made no difference. Try reducing the refresh rate - 100Hz sounds a bit high, especially for a projector. Most TFT's and Projectors seem to like 70 or 75Hz. Might be worth a try. I'd try dropping the Hz. 100 is quite high Is there an echo in here?
tech_guy Posted September 3, 2007 Posted September 3, 2007 Is this a reimaged laptop? If it is you did reinstall the latest Tosh hotkey utility didn't you? I'm only saying because I been there and done it (or not done it as the case was) meself. ;-) This link covers it: http://forums.computers.toshiba-europe.com/jive3/thread.jspa?threadID=641
TechSupp Posted September 3, 2007 Author Posted September 3, 2007 This laptop was one that was as delivered from the Toshiba dealer we use, all I did was add the software we use. I'll check the latest version of the utility and see if its much later than the one thats instaled. Thanks for the suggestions, at the moment I've run out of ideas (apart from the obvious that the laptop is broken!) so any suggestions (within reason of course) are welcome
kearton Posted September 4, 2007 Posted September 4, 2007 Is there an echo in here? yeah. i replied to my original question without reading any posts below it first. my bad...
renegade Posted January 21, 2008 Posted January 21, 2008 Assuming that pressing fn+f5 doesn't work, Simply right click on the desktop, you get a 'Graphics Options' in the list, goto 'Output to' then 'dual display' That WILL sort your problem, nothing to do with wrong res or drivers.
tomscaper Posted January 22, 2008 Posted January 22, 2008 I was about to suggest the right click desktop and go to output and dual display the only other thing i can think of is we have one set of laptops which have to have a option set in the advanced display properties, can you tell us what grapics the laptop has.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now