Dim projector and dim me

[Simcfc73]

Hi,

 

I took a risk and bought a Sanyo PLC-XE31 from an IT recyclers. It didn't come with a remote and these things are buttonless so I got a cheapo one from ebay and after switching it on it was very dim. The bulb warning was on so I thought I would buy a new bulb as even the cost of the projector and a bulb it would still be a bargain... but its still too dim to use.

 

Anyone got any suggestions? I think its only a 1500 lumens projector but all the lights have to be off to watch it.

[chazzy2501]

I think 1500 Lumins is made for a light controlled envronment. How big are you projecting and onto what surface?

 

My projectors are 2600 Lumins they'll work in modest light.

[Simcfc73]

Think its my fault, I never buy less than 2500 but this looked liek a bargain. Think i will need to sell all the lights need to be off and the curtains drawn to use it.

it on as

[ricki]

1500 lumens is low but on some projectors you can make them even dimmer. Have a look in the settings and see if someone has put it in eco mode or something equally as daft.

 

Richard

[twin--turbo]

the LCD is probably clouded, we have had 1500 lumens and lower that have been ok in a classroom.

 

Rob

[Simcfc73]

Given it a right good clean, stripped it down as far as I dare and blasted it with air. Still poor. Might be back on ebay as a home theatre projector.