pugrick_31

I think the first time I ever played a game was The Man with the Golden Gun on the Playstation 1. Throughly enjoyed playing on the PS1, Crash Bandicoot, Medal of Honour (can't remember the specific game!) to name a few and then stuck with it until my parent's bought me the original Xbox. All of this on an old chunky CRT, can't get any better.

Hi all, Looking for a bit of help here as I can't seem to find any solution on the web at all. We use roaming profiles here at our site and because of this any user with a profile won't be able to open Chrome on another machine if they have it open already. This is where we brought in Edge as it would allow users to have Chrome open on let's say their office PC and then use Edge when in a classroom without the need to log off the original PC. We have now pushed the new Chromium Edge to all users and all has been working fine up until last week. For some reason if a user now has Chrome open on another PC and goes to try use Edge, Edge will just not open whatsoever. I have gone through all sorts of research and testing but still can't figure out what is causing it. I am wondering if maybe because Chrome and Edge are Chromium based browsers that they may be trying to use some form of joint cache area and therefore as it is saved to the roaming profile it won't let it be opened. Although I am highly doubting that this is the case. Has anyone had this happen recently and if so know how to fix it? Thanks,

That I am not entirely sure. When it happened to us the connection was re-established before the exam finished so I couldn't answer. I would imagine your EO would be able to contact the exam board or JCQ to get a finalised answer but in my eye I would think that so long as the candidate is present when it is eventually printed then it would be ok? Again though that would be something for your EO to find out, I was just asked to set up the system for us so never looked into the regs and so on as I expected they looked into it all.

ChromEx keeps a local copy of the document saved on the Chromebook itself and regularly uploads it to the cloud for retrieval from the admin panel. If the internet were to go down the exam would not be affected as the local copy will still be there. I have had this happen before and you resolve it by logging into the admin panel and extending the finishing time of the exam to around the time you are retrieving it. Load up the Chromebook and you'll see the exam reappear (as they disappear when the exam time is up). Load back into the exam and submit it again.

Have to say we use ChromEx/Trelson Assessment and have had no issues. Exams Officer originally found it and I would say its cheap for licenses as well for what you get. Quite useful as well that you can specifically set different student accounts to suit their needs such as extra time and spell checker (yep funnily enough I recently found out a spell checker can be used for exams!) without affecting any others.

Preston School Academy is seeking to appoint an enthusiastic, self-motivated, reliable and organised apprentice IT technician. Ideally the successful candidate will already have some IT experience. The post holder will be responsible for providing 1st line support to end users as well as helping to maintain and deliver IT services. The post holder must: Experience in the use of Microsoft Windows and Office products. Be proficient in the use of PC hardware, software and associated peripherals. Be able to demonstrate a level of diagnostic skill. Have an excellent ‘customer facing’ demeanour and communication skills. Have the ability to confidently work with end users of varying technical abilities. As an educational institution we are absolutely committed to providing our staff with the opportunities to further hone existing skills as well as develop new. Part of the package that will be offered to the successful candidates is to provide the resources to undertake a professional IT qualification that will run alongside the IT apprentice college course. It is our aim, that in addition the wealth of experience you’ll gain from working in a dynamic environment, that by the end of the 2 years you would have completed and passed the college course, and be well on the way to attaining a professionally recognised qualification. Closing Date: 9am, Friday 11th February, 2022 For more information, please visit our website: https://www.prestonschool.co.uk/vacancies/associate-staff

Woop woop! Thanks guys!

Hopefully this will help you out a bit. Q1 - you should be able to completely reset the firmware by downloading the firmware file from Promethean support and flashing it directly. I believe you need to contact them to get them to send you the correct firmware file. This video guide should help - Q2 - Our staff sort of decide on their own which they would rather use. All of ours are wired in via HDMI and USB directly to the board rather than using Screen Share but we have noticed some issues with flickering and not connecting at all randomly. Normally using the OPS would resolve it which is when we found it to be more useful as you could annotate a lot quicker and easier on the OPS directly. However we have a mix of old V5 boards and the newer Cobalt variant. The newer models have the ability to annotate on any input along with a lot more features that the OPS use to have on their own. I would honestly let some staff have a look at both and try using both to see which they prefer. Q3 - I don't think it would be possible, but then again never tried to do it. Q4 - Again, we haven't looked at remote management for the boards we have but I would guess that the OPS could be managed via an MDM. I don't think the version of Android on the board itself would let you but if you can then I wouldn't see why not. Only thing to bear in mind is that both the board and the OPS would probably need the Google play service and store to be installed as they don't have it out of the factory. Obviously depending on what MDM you use. Hope this helps!

"Me please!"

I'm good with any days also

As chrisakak9 said above, you would need to speak to who you bought Inventry from for a Paxton integration license. Then you would go into Inventry and link their ID cards to what everyone pulled in from your MIS. Just have to remember that the license only covers one door, so if you have multiple doors to cover you would need to purchase additional doors to add onto the license, not the same cost as the license itself in case you're wondering.

We have Paxton and Inventry integrated together. We've had Paxton for quite a while and then made a move to get Inventry to monitor staff signing in and out on Paxton, plus late students and visitors. All mainly to help and improve the way evacuations work but is useful in other ways too.

We use Lightspeed Relay, as the majority of our off-site devices are Chromebooks we push the Relay extension out via GSuite Admin and it gives them in the correct filtering for either staff or student.

I have a slight feeling this might be because the Google Meet session was started by the student and not the member of staff. If they start the meeting then they become the owner of the Meet session and not the member of staff who organised. We've had the same sort of issue but not all of our classes are recorded so it's a rare occurrence. Don't have a fix for it yet felt this might help point you in the right direction.

We issue RFID fobs out to students instead of ID badges, we find they are easier than badges and lanyards. Costing wise, I'm unsure exactly what we pay as our Kitchen team order them through where we get our Tills from each year for the new intakes. We are just lucky that they have these as we use them to link with PaperCut, saved sorting something else. They are similar to these - https://uk.rs-online.com/web/p/identification-sensors/8828972?cm_mmc=UK-PLA-DS3A-_-google-_-PLA_UK_EN_Automation_%26_Control_Gear_Whoop-_-Identification+Sensors_Whoop-_-8828972&matchtype=&aud-827186183686:pla-341181368536&gclid=Cj0KCQiA7qP9BRCLARIsABDaZzhpnly4aXbYjJ2_CIljZ1M5TlzAx7MHXXkaJQ_f3VAOvZML5Y79Ls4aAnybEALw_wcB&gclsrc=aw.ds Patrick