Ripleys

I did not. In the end I had to downgrade the board/projector with a Sanyo XE40. I did ring NEC about it but all they said is "send it to us" which we do not have the green to do.

Hi Chris, This didn't work. I believe it's because it is stuck in power saving mode. Such a useless feature. I don't know who enabled it or why they did.

Hi Guys, I have a very odd problem and I am unable to resolve it. We have an NEC M230X projector in one of our classrooms. According to the manual it is stuck in standby/power saving mode. I have tried plugging into the PC Control port, however, the projector cannot be recognised because it is in standby/power saving mode. I have tried connecting the VGA into Computer 1 IN and reboot the computer to send signals to the projector. This does not work either. Why have this feature if nothing can be done to turn it back on. Is there anyway I can factory reset this projector without having to turn it on? Cheers

Hi folks, I know this is probably a long shot to get answers for Koha here, but I am having trouble getting the correct barcode (and other biblio) information to appear on the label generator. Barcodes (EAN13) just show up as 00000000 and no biblio information displays at all, no matter what I select. I have tried adding the MARC values rather than the "barcode" or "isbn" fields etc. Anyone have any idea why it might not be working? Cheers

Hi Folks, On our tenant, I have enabled several Licenses to our staff. All products appear on the homescreen of our users apart from Word, Excel, PowerPoint and OneDrive. I am still able to access these by googling "Word Online" or "Onedrive for business", which I don't really want my users doing. Is there any reason why they don't appear on the homescreen? Cheers

Hi Guys Pretty much what the title says. I have just created an office 365 subscription and would like to bump us from the A5 trial to the A1 (free) model. However, both global administrator and billing administrator accounts have no permission to make purchases. What gives? Do I need to add a payment method first or something? Any advice would be great. Cheers

I wasn’t sure because once we move off of the council email it’ll just be deleted shortly after. Cheers for the reply

Morning Guys, I was wondering if anyone could help me out. I have set up office 365 / Azure AD on virtual servers with my own TLD in the past. It went pretty smoothly. However, my school is now moving away from council O365 to our own TLD O365. I am on the Office 365 for education set up page where it asks for Country, Name, School Email, Number, School Name and Size. What do I put down for the school email address, if what I am I am trying to accomplish is essentially, making school email addresses. What is the process after filling this information out? Any insight would be much appreciated. Cheers

I had a similar issue where my workstations could find printers but wouldn't install them over GPO. The print server had an update that changed the way my print drivers were packaged. I had to reg hack each driver to trick the server into thinking that the print drivers were packaged.

Hitachi ED - X3250AT Old ass projectors. I'm guessing they don't have these sensors in them.

One projector has been sitting in our store room overnight. The others I have left unplugged for now.

I have tried the one new bulb that has the same wiring as the old bulbs and it won't power on. I have also tried two old dim bulbs and it won't power on either.

Ok. Well we have two new bulbs that are (back of bulb to the right jack / side of bulb to left jack) and one new bulb that is ( back of bulb to left jack / side of bulb to right jack) Our old bulbs from the projector are the first config.

Morning Folks, Sorry for the badly worded title but here goes. We bought 3 bulbs from a well known retailer a few weeks back for spares. Recently we have had to use these bulbs in our projectors. Once we placed the bulbs in the projectors and powered them on nothing happened for about 30 seconds, then they went into "shutdown/cooldown" phase. Upon closer inspection of the old and new bulbs, two of the three new bulbs have been wired incorrectly (pos to pos & neg to neg) I believe this has caused the projectors to crap out on us now. I have tried putting the bulb that is wired correctly into these projectors and it does the same "boot up > 30 seconds > shutdown/cooldown". Upon contacting their customer support they have said they will take the bulbs back as well as our projectors to verify that this is what has caused the projectors to die. Is there anything I can do to verify myself that they are completely knackered? Maybe some sort of power cycle on them or...? I don't really want to be opening up the chassis because they could turn around and say that it's something I have done. Cheers guys

Morning Folks, I am having an issue with some of our pupils roaming profiles. I have a GP in place to "replace" shared printers to pupils depending on the workstations they log on to (classroom(OU)). For the most part it appears to work however, we do have the occassional pupil popping up with printers from, art, business etc. I tell them to log off and back in again and that also seems to work. But I still get a teacher every now and then bringing print outs from different classrooms. I have a Delete all shared printers at the beginning of my preferences along with unmapping all ports. My replace printers have "remove if not applied" ticked too. Is there anything else I am missing? Cheers