matthewc

Hi, We've been using Ruckus in conjunction with Lightspeed for some time now. To get the authentication from Ruckus to pass through (and persist whilst roaming across access points) you need to do the following: Add Lightspeed as a RADIUS Accounting server in Ruckus (under AAA servers) Then set the Accounting server to Lightspeed in the advanced options section on the WLAN you are using with interim updates set to 15 minutes. Now you need to SSH on to your ZoneDirector and do the following: ruckus>enable ruckus# config ruckus(config)# wlan ruckus(config-wlan)# show Roaming Acct-Interim-Update= Enabled More details are in the Ruckus knowledgebase https://support.ruckuswireless.com/answers/000002813 After that it should all work

Have you setup a rule to NAT the traffic from the seperate VLAN to your external connection?

Hi, We're also trying to setup TMG as a transparent proxy however we're having problems with HTTPS traffic. We also have a squid based RM proxy (SEGfL) and have specified it as an upstream proxy for external connections (proxy.segfl.ifl.net). We've purchased IsaScript and entered the script recommended in the previous post which seems to be working properly with HTTP traffic but we get timeouts when trying anything HTTPS. For the upstream proxy we've tried the default of 8443 for SSL and also changed it to 8080 but it doesn't seem to make any difference. We've also set TMG to route the traffic from our WiFi network to the External connection but this hasn't had any effect either. Is there anything else we may need to change to get this working? Any ideas anyone? Cheers