Jump to content

Recommended Posts

Posted (edited)

Just did some network upgrades, the title sums it up:

WP_000335.jpg

WP_000338.jpg

 

Here is what one cabinet looked like before:

WP_000337.jpg

 

Didn't take an after as it was still a mess but at least both switches were actually mounted as opposed to just sitting in the cab. Had to take the whole cab apart though to move the rails forward which took 'some' time.

 

Finally, gigabit throughout. :)

Edited by SYNACK
Posted
at least it's colour coded :D

 

Yeap, I believe it is called 'pretty rainbow' :) I'm still missing pink, purple and orange but those are difficult colours to come by.

Posted
wahoo, I have 3 new Cisco switches in a box, waiting to be installed. There are a few cabs I would like to tidy but dont get the chance.
Posted
Don't mention {redacted}... you know what happens on this forum...

 

Don't worry, we haven't said it three times yet, that's when the trouble starts :)

  • Thanks 1
Posted

Is that at the top waiting to be terminated? Nice to see the cable tidies put to good use!

 

Makes me feel better about some of ours, after seeing this.

Posted
Is that at the top waiting to be terminated? Nice to see the cable tidies put to good use!

 

Makes me feel better about some of ours, after seeing this.

 

The horrifying thing is that this is major progress from what it was, there are two different types of cage nuts in there, different screw pitch but same dimensions. There are only about half as many cage nuts as there are supposed to be. Till I got there the thing just hung open from the back hinge as it could not be shut. The loose cable on top is from a room upgrade where the contractor helpfully wired the classroom side but neglected to price terminating the other ends. They then went under and so there it sits waiting for more budget and time.

 

There is another one which is my next challenge in that school, that one still hangs open and the cable was terminated that short that the rails could not be more than half way forward in the case otherwise they would not reach. I'm actually going to have to lower the cabinet on the wall to get enough slack to bring the rails forward so that anything other than patch panels can be mounted. This is the core cabinet for that school to so I'm going to have to pull the thing overnight unless I want to blackout the whole network for a day. Still, progress... better :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...