iSteve Posted February 27, 2012 Posted February 27, 2012 Hello, I'm trying to resurrect our Promethean IWBs as we now have some staff who are keen on using them as more than just a projector screen. We have PRM-AB2-01 boards. Recently I have found a batch of ActivSlates, which seem to work - PRM-RS-01. Doing some research online, I read that the slates can talk directly to the boards, but in our case with our AB2-01 boards, we needed an ActivHub. We now have a hub to test with (PRM-AH2-01) but I cannot get the slate to talk to anything! The computer can see the hub. The hub is running the latest firmware, and the computer is running the latest version of the driver. The Hardware tab can see the board when connected over USB. When I plug in the hub it will list the hub, then wireless board, wireless slate etc. Thinking that the board may be wireless I tried to 'register wireless board'. This doesn't seem to talk. If I plug the board back in over USB, and try to register a wireless slate, the register button is greyed out. Using an older version of the driver, if I try to register the slate it will tell me a PIN to tap in to the slate, but my keystrokes/tappings do not do anything and the computer remains on the register screen. Can anyone help? Do I have the wrong combination of hardware?
accura2000 Posted February 27, 2012 Posted February 27, 2012 Stupid question, you are using the slates pen, and not the whiteboards pen as they are different....
iSteve Posted February 28, 2012 Author Posted February 28, 2012 We are using the board pen ActivPen3-1. In what way does the slate pen differ? I assumed they were the same as we have never had any other pens with our slates while they were in storage. Incase it matters, the pen does operate the small LCD on the corner of the slate, but this might just be pressure sensitive?
accura2000 Posted February 28, 2012 Posted February 28, 2012 Sorry, didnt notice the model number, we have some ActivSlate50's here and use the ActivPen 4. Did find a short post on prometheans site, Re: activslate will not register (not showing pin prompt) - ActivPeripherals - Forums - PrometheanPlanet
iSteve Posted February 28, 2012 Author Posted February 28, 2012 Thanks. I found that before. Seems our board is different to the one mentioned in the post. I will see if I can contact their support.
accura2000 Posted February 28, 2012 Posted February 28, 2012 Found this post ActiveSlate and Activhub compatibility. - ActivPeripherals - Forums - PrometheanPlanet It would appear the hub is not compatible with your slate...
Recommended Posts