marsdenprimary Posted October 5, 2011 Posted October 5, 2011 Hi, Where and how do we change the bulb for our Activboard +2? It's the orange one x x x J x
dezt Posted October 5, 2011 Posted October 5, 2011 If it's the Sanyo PLC XE-40 (which is the projector we have on ours), First you need to take the big orange casing off that surrounds the projector. Then you will need to take the projector off the boom arm and take the metal plate off the bottom of the projector. Once you have done this there is a door on the right hand side towards the back end of the base which has the bulb in. There is 1 screw that you need to unscrew to take the door off, then 2 screws holding the bulb in. To put it all back together just do the above in reverse. 1
Recommended Posts