Jump to content

Recommended Posts

Posted

Hello, my Dad has kindly asked me to split his roof aerial off to 5 rooms of the house, currently the cable goes to 2 rooms only. Could someone suggest what kind of kit i'll need, if I'll need an amplifier at all etc, and what to look out for when doing this. Hes getting loft and cavity wall insulation put in week after next and wants it done before then.

 

Thanks.

Posted
CPC sell all the kit you'll need. Best bet is an amplifier in the loft (or on the mast) but as close to the aerial as possible. If in the loft, get a multi output type and run to each room. One room has a power supply in it, this feeds power back up to the amp using the coax cable. If the amp is on the mast, then locate the splitter in the most convenient room (or loft), but near the aerial.
Posted

If you are going to be installing new aerial points, make the effort (and investment) to use decent cabling.

 

Instead of the cheap generic brown TV cable (RG6 etc) use Satellite cabling (WF100).

 

I used it to install 6 points throughout the house.

The advantage being if in the future you want to run a Satellite/FM/DAB connection to a particular room you can always a install a distribution amplifier within the loft etc to combine TV, FM, DAB and Satellite signals through the single cable going to each room and connect a diplexer/or triplexer wall mount.

(Whilst you're at it with the floor boards up etc, install some Cat5e cabling! or CAT6 if you're feeling flush)

 

WF100 Coax Cable

Coaxial WF100 digital cable Satellite Sky and Freeview extension leads double screened

Shop around for prices, but ensure you compare like for like (I managed to get 50m for £19)

 

Amplifiers/Diplexers etc

Diplexers, filters, amplifiers for terrestrial TV

 

Wall Plates

Wall Plates screened sockets

 

Terrestrial FAQ

FreeviewTerrestrial TV Technical index

 

I don't have any links with the above company etc, but they know their stuff!

Posted

Right then, on the shopping list:

 

50m cable

5x TV + FM/DAB screened diplexed surface plate

1x 6 way mains amp (6 x 5dB outputs + full, TV + FM/DAB inputs)

Co-ax connectors for amp

 

That about right?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...