SCCM installation on VMWare

[gshaw]

Just looking at rebuilding SCCM to get it onto the new servers, which would be as a VM. It's been happy on a physical server up until now so will be an interesting change! I've read quite a few pieces about not installing as a virtual machine but for the time being haven't got much choice so will have to keep an eye on the performance stats, particularly on disk IO.

 

Having a bit more flexibility with hard drives I've split it up a bit...

 

- system drive

- SQL partition for installation and DB

- SCCM installation partition for binaries and inboxes

- SCCM package share for distribution point and source files

 

Could in theory split the DP out to another VM but whether it's worth it for a small install is debatable.

 

Anyone else running SCCM virtually that can share your experiences?

[Theblacksheep]

Just looking at rebuilding SCCM to get it onto the new servers, which would be as a VM. It's been happy on a physical server up until now so will be an interesting change! I've read quite a few pieces about not installing as a virtual machine but for the time being haven't got much choice so will have to keep an eye on the performance stats, particularly on disk IO.

 

Having a bit more flexibility with hard drives I've split it up a bit...

 

- system drive

- SQL partition for installation and DB

- SCCM installation partition for binaries and inboxes

- SCCM package share for distribution point and source files

 

Could in theory split the DP out to another VM but whether it's worth it for a small install is debatable.

 

Anyone else running SCCM virtually that can share your experiences?

 

I use:

* SCCM for FEP and DB (2vcpu and 4gb ram)

* File server for distro point

* Wsus server for distro for updates etc

 

Site is around 1000 computers. For a small site SQL on the same system will be OK, i'd still consider splitting out the files so the server can run without the bandwith for the nics getting overloaded when downloading/updating.

[gshaw]

I've got a WSUS server on another box that I'm happy with at the moment, tbh I've never really got on with SCCM \ WSUS integration... didn't seem to make update distribution any easier (if anything the opposite) so will leave that as is for now.

 

Separate server for distro point seems to be a worthwhile idea, did you put your package source files on that box as well?

[Theblacksheep]

I've got a WSUS server on another box that I'm happy with at the moment, tbh I've never really got on with SCCM \ WSUS integration... didn't seem to make update distribution any easier (if anything the opposite) so will leave that as is for now.

 

Separate server for distro point seems to be a worthwhile idea, did you put your package source files on that box as well?

 

Yeah all package sources and distros are on the same server in different root directories, it means double the space, but it keeps it tidy and stops the sccm server doing too much of the donkey work when it can be left to the top level work.

[richbrowncardiff]

Hi All, i want to use sccm for FEP only (at present) installation is proving to be a nightmare. have you got a good doc or tips for getting it up and running please ? its SQL which im having the problem with IIS, etc all configured and passes the pre req checks. apparently collation and account access are not correct but they are.... (to me anyway) also re-installed several times from scratch and always hit the same problem so any help would be much appreciated!

[gshaw]

Which version are you using, 2007 or 2012?

[FN-GM]

I use:

* SCCM for FEP and DB (2vcpu and 4gb ram)

* File server for distro point

* Wsus server for distro for updates etc

 

Site is around 1000 computers. For a small site SQL on the same system will be OK, i'd still consider splitting out the files so the server can run without the bandwith for the nics getting overloaded when downloading/updating.

 

Ours is nearly the same and works great with SCCM 2007.

[richbrowncardiff]

its 2012 but have also tried 2007 and have the same problem. i must be missing something....

[synaesthesia]

Following the guides on windows-noob.com or the blogged ones here you can't really go too far wrong. Is there a particular point you're struggling with?

[richbrowncardiff]

Its the SQL part. I have followed guides but no joy. i get errors regarding SQL service accounts (i have tried network, local system and domain admin) but no joy, also it says i need to choose collation sql_latin_cp1_AI,ES (think thats it of the top of my head) but i have set it to what is recommended. Also set local pipes etc. within sql management centre.

[synaesthesia]

Right, I suggest starting again, it's easier

 

Install SQL 2008 R2. During installation, one of the tabs is collation. In there, on the top collation option it MUST be set very specifically to SQL_Latin1_General_CP1_CI_AS

 

Install SQL 2008 R2 SP1

Install Cumulative Update 4

 

You shouldn't have to touch anything else - certainly don't need to go near changing the settings in management centre like named pipes any more (you did have to in older betas/RC1 of SCCM 2012)

 

I tend to use the system account (same for all services), you could if you wish make another domain admin account for instance SQLSERVICEUSER and set that for all the services. Also make sure the SQL service is actually running before attempting SCCM install.

 

If you've done all that, screenshot the error page for me and I'll run you through it.

[neilmc]

Hi having an issue with SCCM, I get to the point where I can install it but I get the attached error

 

and in the log file the error

 

ERROR: Failed to get the buffer size for LookupAccountName. Error = 1722 $$<04-25-2012 15:07:40.989-60>

ERROR: Failed to get SID for user (NT Service\MSSQLSERVER) $$<04-25-2012 15:07:40.989-60>

~~===================== Completed Configuration Manager 2012 Server Setup ===================== $$<04-25-2012 15:07:40.991-60>

 

[synaesthesia]

That's just an SQL installation error, you've not installed the right versions of SQL as required. Don't installer newer versions because "it should still work" - it won't.

If you use SQL 2008 R2, you *must* have the setup I described in my last post.

[richbrowncardiff]

Hi all thanks for your help sorry for not getting back sooner. I have installed everything from scratch again and still no joy. Really annoying as i did get 2007 working after a lot of hassle. then removed (should have left it installed and upgraded to 2012) Will leave it for now and try again when i get chance . (New domain and full migration to plan for and configure for the summer).

 

cheers

[Arthur]

Install SQL 2008 R2 SP1

Install Cumulative Update 4

For SCCM 2012 RTM, Microsoft and Windows-Noob both say you need Cumulative Update 6 for SQL Server 2008 R2 SP1.

[synaesthesia]

Heh, I installed before either of those were available. CU4 worked fine