SteveT Posted March 7, 2007 Posted March 7, 2007 HP Colour laserjet 3550 with HP jetdirect en3700. Has worked fine(ish) for years. No workstations now able to print to it. I tried to run setup again on the server but setup program unable to find printer now. Tried to print out settings from jetdirect but printer reports "chosen personality not available". Printer works fine when connected directly to a workstation so not a driver problem which is the only googled solution I could find. I suspect jetdirect box is knackered but at a replacement cost approaching £200 want to be sure. Anyone any blazing insights??
Norphy Posted March 7, 2007 Posted March 7, 2007 Contact Making It Green and seeing if they have any EN3700s left, we got ten for £300 not so long ago from them Aside from that, does the JD box respond to ping, can WebJetAdmin still see it, does the web interface still work?
djm968 Posted March 7, 2007 Posted March 7, 2007 Any use? http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=996617&admit=-682735245+1173278202617+28353475
mac_shinobi Posted March 7, 2007 Posted March 7, 2007 go to the hp site and get the jet direct manager ( or management ) something like that, and do a firmware update on the jetdirect. see if that helps any, might be worth while reading the documentation before you run the firmware update because obviously if it goes tits up, it will kill the jet direct
SteveT Posted March 7, 2007 Author Posted March 7, 2007 Aside from that, does the JD box respond to ping, can WebJetAdmin still see it, does the web interface still work? Nope, cannot ping etc. but it's possible the IP address has been changed. I cannot check that since the test button on the back that gives you the settings printout gives the "chosen personality not available" response! djm968 .......... saw that on google but it refers to driver problem as solution. gecko ......... cannot update as I cannot access the jetdirect box. Download manager cannot find it, I cannot even ping it at it's last known IP address. Think a new one is looking more and more likely!
djm968 Posted March 7, 2007 Posted March 7, 2007 Have you tried a factory reset? http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpj02300&locale=en_US#N106BB
mac_shinobi Posted March 7, 2007 Posted March 7, 2007 If that does not work then possibly a new one :-S
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now