Connect to a cisco firewall using hyperterminal

[timbo343]

Does anyone know what should be configured for this to work?

Surely you should just need to click ok on the new connection and leave all the deafult settings?

 

T

[Midget]

bits/s = 9600

databits = 8

parity = none

stop bits = 1

Flow control = none

[bossman]

Nice one Midget beat me to it.

[timbo343]

i thought i was that, but i aint getting anything back from the firewall

[DMcCoy]

You need to press enter 2 or 3 times to bring up the login when you have connected (if its like the other ios I have used). The default port speed can also be changed, so try 19200 etc

[Midget]

also check that you have selected the correct com port