googlemad Posted July 27, 2010 Posted July 27, 2010 Imaged a classroom of PCs using FOG today, all went well except I had to reimage some as they didn't fully image for some reason (Either I overloaded the server or the caretakers knocked the power off!). Anyway all up and running except ironically PC number 13 which fails to image! Gets to around 42% then kernel panic lots of garbage on the screen. Tried to wipe the disk but still the same, tried to run it without anything plugged in apart from power monitor and ethernet cable no joy. Also tried CMOS reset again no joy. Now running a memory test on it but if that passes what else could it be? I should stress this PC is from the exact same batch as the rest in the room an Intel DG33BU Stone!
Andrew_Sharrad Posted August 4, 2010 Posted August 4, 2010 Hi, Did the memory test pass? If it did, it might be worth running a quick hard drive test, or reading the SMART information off the drive to check its health quickly - HDAT2 Download
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now