Universal Projector remote for Sanyo Projectors?

[superatticman]

Chaps

 

We currently use the following mix of Sanyo projectors:

 

SE15, SE20, XU-41, XW200, XE40, XE31, XE32

 

Is there a single remote that will allow me to simply power them on and off?

 

So far I have managed to find 2 remotes that will do all of them.

 

Thanks for any help.

[Haptic]

will take a look into this for you , can you ping me over a quick email with your details

 

[email protected]

Edited June 14, 2012 by Dos_Box

[WildBlueRhino]

I would also be very interested in this, as I'm not prepared to pay out more than £100 for a replacement remote control.

[plexer]

I have started installing the Vision Techconnect control boxes for this, it's screwed to the wall so can't get lost.

 

Does require a remote to progam it initially though.

 

Ben

[Educare_AV]

There is also a system called Pixie too, which allows you to change source, on/off and adjust volume control. Easy to fit and program. But you do need a remote to program the panel. Easy to reprogram if you swap out the projector in the future too.

[plexer]

Yes there is but the pixie is 50% more than the TC2-CTL2

 

Ben

[Educare_AV]

I suppose you get what you pay for.

[plexer]

Yes and no if a product offers all of the functionality that one needs then there is not point in paying more money for a product to do the same job.

 

Ben

[Educare_AV]

I see what your saying but from experience, I have installed around 60 pixie systems and had not a single failure. I have however heard a lot of complaints about high failure rates with the brand you mention with there in wall amp range. So if that is anything to go by.

[plexer]

I have several of the in wall amps installed here and not had a single failure but had several failures with the original promethean amps we had installed.

 

I've only got a couple of the TC IR units in use but so far not had a problem with these and CTL2 version has a lot more features then the 1 version and offer all the functionality of the pixie systems, with the TC modules you also get a pre-wired IR blaster and 2 more which are terminated with 3.5mm sockets to use when controlling multiple items at the same time.

 

Thanks for your comments though.

 

Ben