flaviorodrigues Posted March 1, 2010 Posted March 1, 2010 Hi, i have some acess points from diferrent manufactures (HP and smc) I like to add another HP acess point HP ProCurve MSM422 WW Access Point and i like to put one wireless controller, i think on HP ProCurve MSM760 Access Controller can i connect the other acess points like smc, and others to this acess controller? or just HP pro curve? thanks Flavio Rodrigues ESPE
K.C.Leblanc Posted March 1, 2010 Posted March 1, 2010 If you're using a managed system you have to use the same manufacturer's APs.
ricki Posted March 1, 2010 Posted March 1, 2010 HI I am not an expert on this but do you mean a radius server as an access controller. If you are using a radius server as far as I know you can set this setting in the Access point so that when a computer tries to connect it will talk to the radius server to see if the computer and user can connect. and then if it is and the certificates are ok the access point will allow the computer to connect to the network. If this is the setup I cannot see any reason why you cannot use different access points as long as they can be set up to authenticate with the radius server. Richard
Ric_ Posted March 1, 2010 Posted March 1, 2010 If you're using a managed system you have to use the same manufacturer's APs. Not if you use a BlueSecure system from BlueSocket To achieve a consistent feature set and best performance, it's best not to mix APs though and I don't think that the HP gear supports other manufacturers' kit.
flaviorodrigues Posted March 1, 2010 Author Posted March 1, 2010 i like a system for example. i have same ssid in all school. and when users move from one place to another to dont drop the connection etc
localzuk Posted March 1, 2010 Posted March 1, 2010 i like a system for example. i have same ssid in all school. and when users move from one place to another to dont drop the connection etc So, you want a managed solution (or as ahuxham showed, a system which utilises 802.11r/IAPP). The HP controller would want to be the Mobility Controller, rather than the access controller, but it would only control the HP AP's, and only their 'HP ProCurve MultiService Mobility Access Points' also.
Ric_ Posted March 1, 2010 Posted March 1, 2010 'HP ProCurve MultiService Mobility Access Points' Obviously HP pay their marketing department by the letter for new product names!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now