chrbb Posted September 29, 2006 Posted September 29, 2006 Is it OK to run a Cat5 cable (long patch cable) through a suspended ceiling to enable a computer to placed in a different part of the classroom? Due to superb forward planning (not!) our classrooms have 1 network socket at the front of the classroom in a really inconveiniant place.
Nij.UK Posted September 29, 2006 Posted September 29, 2006 well i dont think that its best practice, but i guess you could, as long as the distance from the cab to the point + the length of the long patch lead dont extend 90M ( i know it says 100M) to maintain QOS
webman Posted September 29, 2006 Posted September 29, 2006 There was a thread about this very same question last week. Ah yes, here it is
chrbb Posted September 29, 2006 Author Posted September 29, 2006 cheers just read the other thread, so if you run a cable through a ceiling space it has to be supported then not just resting on the tiles? We can't run cable round skirting or doorways due to asbestos probs, and can't have a proper job done due to finance! Thought about a wireless access point but finance rears it's ugly head again!
Andrew_C Posted September 29, 2006 Posted September 29, 2006 Probably not relevant in most cases, but some ceiling voids are used as a plenum for HVAC systems. If this is the case, LSF cables must be used! HVAC = Heating Ventilation Air Conditioning LSF = Low Smoke & Fume
CyberNerd Posted September 29, 2006 Posted September 29, 2006 Ideal world you should run in cable trays. I'd decide based on the age of your school - If its 1950's and due for a PFI replacement then I'd just run it anyway because the cost incurred for putting in a cable tray would be prohibitive. If the schools is going to be their in 20yrs then do it properly as its a long term investment. if your place is anything like ours you'll have loads of unsupported electrical/alarm/telephone cables from bodged contractor jobs over the years and with the asbestos problems, I wouldn't worry about a unsupported cat5e -just avoid the tube lighting and electrics from an RF pov.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now