[ghost] Ghost multicasting over vlans

[maark]

Hi,

have done research and looked at threads but still can't see what else i can do to get multicasting working between vlans - unicast works ok. I have bought premium licence for HP 5412 switch and enabled multicast routing.

Trying to multicast between two rooms on vlan 6 - have posted config of switches below - if anyone can spot anything obvious please let us know -running out of ideas. Can see session if I put in IP address of multicast server on client but not otherwise - server sees client and can start session from server but then it just times out - client does not respond.

Core switch:

Running configuration:

 

; J8698A Configuration Editor; Created on release #K.13.25

 

hostname "ProCurve Switch 5412zl"

snmp-server location "Server room rack"

web-management management-url ""

time daylight-time-rule Western-Europe

ip access-list standard "block-admin"

10 deny 10.58.187.136 255.255.255.128

exit

module 1 type J8702A

module 2 type J8702A

module 3 type J8702A

module 4 type J8702A

module 5 type J8702A

module 6 type J8706A

interface C23

speed-duplex auto-1000

exit

interface D1

lacp Active

exit

interface D2

lacp Active

exit

interface D4

disable

lacp Active

exit

interface D23

lacp Active

exit

interface D24

lacp Active

exit

 

ip default-gateway 10.53.160.33

ip routing

timesync sntp

sntp unicast

snmp-server community "public" Unrestricted

snmp-server host 10.56.132.86 "public"

snmp-server host 10.56.133.207 "public"

snmp-server host 10.56.132.17 "public"

snmp-server host 10.56.132.162 "public"

snmp-server host 10.56.133.1 "public"

snmp-server host 10.56.132.13 "public"

snmp-server host 10.56.132.244 "public"

vlan 1

name "DEFAULT_VLAN"

untagged A1-A17,A19,A21,A23-A24,B1,B4-B5,B7-B22,B24-C6,C9-C10,C12-C23,D1-D4,D7-D12,D14-D24,E1,E3,E6-E14,E18-E24,F1-F24

ip address 10.56.132.32 255.255.255.0

ip address 192.168.10.1 255.255.255.0

no untagged A18,A20,A22,B2-B3,B6,B23,C7-C8,C11,C24,D5-D6,D13,E2,E4-E5,E15-E17

exit

vlan 2

name "printers"

untagged C24

ip helper-address 10.56.132.8

ip address 192.168.2.1 255.255.255.0

tagged A1,A3,A5,A7-A9,A13,A21,B5,C23,D8,D10,E14,E19,F1-F6,F12,F23

exit

vlan 6

name "IT-rooms"

untagged A18,A20,A22,B2-B3,B6,C7-C8,C11,D5-D6,E4-E5,E15-E17

ip helper-address 10.56.132.8

ip address 10.58.184.1 255.255.255.0

tagged A1,A5,A9,A13,B5,D8

ip igmp

exit

vlan 7

name "Ground-Floor"

ip helper-address 10.56.132.8

ip address 10.58.185.1 255.255.255.128

tagged A3,A5,E19,F2-F3,F5-F6,F12,F23

exit

vlan 8

name "Science"

ip helper-address 10.56.132.8

ip address 10.58.185.129 255.255.255.128

tagged F1,F4-F5,F12

exit

vlan 9

name "Design"

ip helper-address 10.56.132.8

ip address 10.58.186.1 255.255.255.128

tagged F1

exit

vlan 10

name "Library"

ip helper-address 10.56.132.8

ip address 10.58.186.129 255.255.255.128

tagged A3,A7-A8,A21

exit

vlan 11

name "Admin"

untagged D13

ip helper-address 10.56.132.8

ip address 10.58.187.1 255.255.255.128

tagged A7,A21,D8,D10,F1-F2

exit

vlan 12

name "Guestweb"

ip helper-address 10.56.132.8

ip address 10.58.187.129 255.255.255.128

tagged B5

exit

vlan 15

name "wan-intercon"

untagged E2

ip address 10.53.160.38 255.255.255.248

exit

vlan 3

name "wifi-staff"

untagged B23

ip helper-address 10.56.132.8

ip address 10.56.134.1 255.255.255.0

tagged A3,A5,A7-A9,A13,A21,B5,C23,D8,E5,E19,F1-F4,F6,F12,F23

exit

vlan 4

name "wifi-1"

ip helper-address 10.56.132.8

ip address 10.56.133.1 255.255.255.0

tagged A7-A8,B5,D8,F1-F2,F5,F23

exit

vlan 5

name "wifi-2"

ip helper-address 10.56.132.8

ip address 10.56.135.1 255.255.255.0

tagged F4

exit

fault-finder bad-driver sensitivity high

fault-finder bad-transceiver sensitivity high

fault-finder bad-cable sensitivity high

fault-finder too-long-cable sensitivity high

fault-finder over-bandwidth sensitivity high

fault-finder broadcast-storm sensitivity high

fault-finder loss-of-link sensitivity high

fault-finder duplex-mismatch-HDx sensitivity high

fault-finder duplex-mismatch-FDx sensitivity high

mirror 1 port A1

sntp server priority 1 10.56.132.8

no ip ssh

ip route 0.0.0.0 0.0.0.0 10.53.160.33

ip multicast-routing

router ospf

exit

router pim

exit

interface B6

monitor all Both mirror 1

exit

spanning-tree

vlan 6

ip pim-sparse

ip-addr any

exit

exit

password manager

password operator

 

IT room switch

Running configuration:

 

; J4899B Configuration Editor; Created on release #H.10.67

 

hostname "IT2"

web-management management-url ""

ip default-gateway 10.56.132.32

snmp-server community "public" Unrestricted

snmp-server host 10.56.132.13 "public"

snmp-server host 10.56.135.97 "public"

snmp-server host 10.56.132.17 "public"

snmp-server host 10.56.132.162 "public"

snmp-server host 10.56.133.1 "public"

snmp-server host 10.56.132.244 "public"

vlan 1

name "DEFAULT_VLAN"

untagged 49

ip address 10.56.132.35 255.255.252.0

no untagged 1-48,50

exit

vlan 2

name "printers"

untagged 1-2,36

tagged 49

exit

vlan 6

name "IT-rooms"

untagged 3-34,37-48,50

no ip address

tagged 35,49

ip igmp

exit

vlan 3

name "wifi-staff"

untagged 35

tagged 49

exit

no stack

spanning-tree

password manager

password operator

 

Many Thanks Mark

[andyrite]

I used ip pim-dense instead. What vlan are your servers in? If they are in a different VLAN, you need ip pim-sparse in that VLAN too. Edited October 20, 2009 by andyrite

[maark]

will try them 2 suggestions thanks

[maark]

That worked needed pim-sparse in default vlan that servers were in- edugeek comes up trumps again,

Thanks Mark:)

[Reaper]

Hi there

 

Would I right in thinking that if I can't setup IP PIM-Sparse or Dense then Multicasting over VLANs won't work?