Jump to content

Recommended Posts

Posted
We have some new HP notebooks connected to SmartBoards and I notice the new standard VGA port seems to have done away with the traditional screws which used to secure the cable? OK for now but I'm thinking that down the road a while after the cable has been taken off and attached a many few times the connection is going to become a bit loose. Any suggestions round this one please?
Posted
We have some new HP notebooks connected to SmartBoards and I notice the new standard VGA port seems to have done away with the traditional screws which used to secure the cable? OK for now but I'm thinking that down the road a while after the cable has been taken off and attached a many few times the connection is going to become a bit loose. Any suggestions round this one please?

 

Had a similar problem with this, and for the life of me don't understand why laptops are now removing the screws to be able to firmly attach cables.

 

We just decided in the end wrap two layers of cling film over the edge and squeeze the connection on, at least then it does come off, but not as easily.

  • Thanks 1
Posted
Have a search for VGA port saver. A little attachment that connects into the existing port. You then connect the cable into this. If the attachment becomes damaged you just replace this and not the whole motherboard! They typically cost a couple of quid each.
  • Thanks 2
Posted
Thanks for the replies folks. The beauty of EduGeek, never an embarassment asking any questions and someone (very often Michael!) usually has the answers.

 

... unless it's Australasian time and Synack is online, in which case he takes over :)

 

Useful tip that though Michael... I'll store that one away.

 

 

Oh and just to suggest there's also, those USB hubs that you can hook everything local into and then just connect to a laptop via USB. I may be thinking ahead of myself but I was sure I saw something like that, that didn't require a VGA cable connection too.

Posted
Oh and just to suggest there's also, those USB hubs that you can hook everything local into and then just connect to a laptop via USB. I may be thinking ahead of myself but I was sure I saw something like that, that didn't require a VGA cable connection too.

 

Yep, Targus do a great USB docking station that carries Video out too, so the only thing you need to plug into the laptop is one USB plug. Works great!

 

Link here: TARGUS ACP50EU Mobile Docking Station with Video | ServersPlus

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...