Jump to content

Recommended Posts

Posted

Just in case some other luck edugeeks get an RC helicopter for their 50th and want to practice on the simulator before wrecking their new toy ...

 

Install the FMS software - plug cable into controller and then computer - wait for Windows to find new device.

 

Run FMS and select Controls - Analogue controls.

Select Joystick interface - Mapping/Calibration and set the channels 4-2-1-3-4-2-1-3 top to bottom.

 

Do the calibration but DON'T LEAVE THROTTLE IN MIDDLE POSITION as suggested - leave in at minimum before pressing Finish (unless planning on doing acrobatics on 1st attempt :) )

 

regards

Simon

 

PS I'm doing this post as a bit of an experiment as its taken me ages to google this info (and I had to modify the info when I found it) - so I'm seeing if this post will turn in future searches (in order to help others) as I've found out in the past that edugeek is looked upon very favourably by mr google :)

Posted
Just in case some other luck edugeeks get an RC helicopter for their 50th and want to practice on the simulator before wrecking their new toy ...

 

Install the FMS software - plug cable into controller and then computer - wait for Windows to find new device.

 

Run FMS and select Controls - Analogue controls.

Select Joystick interface - Mapping/Calibration and set the channels 4-2-1-3-4-2-1-3 top to bottom.

 

Do the calibration but DON'T LEAVE THROTTLE IN MIDDLE POSITION as suggested - leave in at minimum before pressing Finish (unless planning on doing acrobatics on 1st attempt :) )

 

regards

Simon

 

PS I'm doing this post as a bit of an experiment as its taken me ages to google this info (and I had to modify the info when I found it) - so I'm seeing if this post will turn in future searches (in order to help others) as I've found out in the past that edugeek is looked upon very favourably by mr google :)

 

Any photos of the copter Si ? would love to see them as was into it abit when a few years ago:cool:

Posted

I'd better do that before the maiden flight and it gets broken as even on the simulator (with many hours of MS FS logged as a youth) I can't seem to do anything more than take of vertically and come back down again :lol:

 

Any x-y movement and I'm doomed! :lol:

 

I'm determined to get it right though!

 

regards

 

Simon

Posted

mrWItch has been trying to fly one for several years and still can't get it right. Mind you, he spends most of his time taking it, and others, to bits and building new motors and the like.

Still, it keeps him out of mischief. Bless :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...