FN-GM Posted April 27, 2009 Posted April 27, 2009 Hi We have an APC 3000 UPS. The battery is dead. I am just about the change it but do i need to unplug the UPS from the mains or can i keep everything running while i change it? Thanks
sdc Posted April 27, 2009 Posted April 27, 2009 I'm fairly sure you can leave the supply and the load connected whilst changing the battery - they're hot-swap. We have done a number of APC devices this way without any issue. Just hope you don't get a power cut in the middle of the proces....!!
BatchFile Posted April 27, 2009 Posted April 27, 2009 ...and put on your wellies and rubber gloves just to be on the safe side I did one a couple of years ago - I THINK it hot swapped ok:eek:
Butuz Posted April 27, 2009 Posted April 27, 2009 I shut mine down during swap coz I'm a scaredy cat Butuz
FN-GM Posted April 27, 2009 Author Posted April 27, 2009 just done it on a live cab. All went fine, a little tricker than expected becuase the batteries swelled.
Little-Miss Posted April 27, 2009 Posted April 27, 2009 Me a scaredy cat too. Uplugged mine, but im lucky enough to have one running next to it that could take an extra server without being overloaded. Remember i asked about swapping them and someone mentioned they swell? They werent joking!! Had to get a MAN to do it in the end!!! Pah!!!
sdc Posted April 27, 2009 Posted April 27, 2009 Nice... glad it worked OK for you though. What do you do with your dead batteries?
FN-GM Posted April 27, 2009 Author Posted April 27, 2009 Nice... glad it worked OK for you though. What do you do with your dead batteries? erm they are in a store cupboard we are leaving it for BSF to deal with
powdarrmonkey Posted April 27, 2009 Posted April 27, 2009 erm they are in a store cupboard we are leaving it for BSF to deal with ha, awesome idea!
DMcCoy Posted April 27, 2009 Posted April 27, 2009 just done it on a live cab. All went fine, a little tricker than expected becuase the batteries swelled. How hot are they getting? I've never seen this happen over many years with ups batteries, even in quite warm rooms.
laserblazer Posted April 27, 2009 Posted April 27, 2009 erm they are in a store cupboard we are leaving it for BSF to deal with Would you like some projector bulbs to keep them company?
Domino Posted April 27, 2009 Posted April 27, 2009 How hot are they getting? I've never seen this happen over many years with ups batteries, even in quite warm rooms. Just has ours replaced in our incredibly meaty ups after a aircon failure caused them to swell. Mind you, it was blummin hot...
Little-Miss Posted April 27, 2009 Posted April 27, 2009 I think heat was to blame for our batteries swelling. Before i arrived at the school the servers etc were moved into a cupboard with poor ventilation and cooling. So i wouldnt be suprised if that was the reason!
HodgeHi Posted April 27, 2009 Posted April 27, 2009 Would you like some projector bulbs to keep them company? If you have an issue with trying to get rid of used projector lamps can i suggest Simply Lamps? Even if you don't purchase from them they will collect your used bulbs free of charge. I haven't used them yet but plan on doing so very soon. I called and sorted out what i need to do but not got round to it yet
FN-GM Posted April 28, 2009 Author Posted April 28, 2009 (edited) Hi, I changed the battery at the time of the first post. This morning the UPS is showing a red light still. How do i get rid of it please? thanks EDIT: fixed it just held in the test button Edited April 28, 2009 by FN-GM
Chris_in_notts Posted April 28, 2009 Posted April 28, 2009 If you have an issue with trying to get rid of used projector lamps can i suggest Simply Lamps? Even if you don't purchase from them they will collect your used bulbs free of charge. I haven't used them yet but plan on doing so very soon. I called and sorted out what i need to do but not got round to it yet We need to get shut of a load of lamps, but on simplylamps website it says they will only collect lamps they have supplied
HodgeHi Posted April 28, 2009 Posted April 28, 2009 Give simplylamps a call. The guy at Bett told me that they would collect any bulbs whether they had supplied them or not. The lady i spoke to also said that they would collect mine. They didn't supply mine either. The wheels are already in motion but i have yet to get them boxed a to arrange collection.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now