Papercut MF Logo on Xerox Copiers

[farnworthz]

Hello,

 

In our MAT, we mainly use Sharp MX Copiers, I've been able to change the default Papercut MF logo on them which is fab, however, we're supporting IT for another school, I've got Papercut setup on the Xerox copier that goes back to our servers in the Data centre. All working fine, except I'd really like to change the Papercut MF Logo. It's a Xerox AltaLink. I've gone onto the Server and in program files etc, there isn't a folder for Xerox. Can't figure it out, any help would be greatly appreciated!

 

Thanks,

Zak

[PaperCutterAl]

PaperCutter here who knows the brainy PaperCutters. Assuming it's a Xerox EIP 1.5+ platform device:

 

OFFICIAL ANSWER - Your PaperCut reseller should have access to the answer in the install guide.

 

UNOFFICIAL ANSWER - That answer probably looks something like this (don't tell anyone though):

 

 

To customize the logo on the headers of all PaperCut MF screens

 

1. Create the device's header logo as per the following specifications:

 

• Image height = no more than 55 pixels
  
• Image width = no more than 360 pixels
  
• Image file format = .png
  
• Image filename = logo.png
  
• Image file location = [PaperCut Install Location]\server\custom\web\device\xerox\1.5\
  

2. Log in to the device as a test user (simple test user).

 

3. Verify that the device's header logo is as required.

 

 

 

Hope that helps!

[ZakFarnworth]

PaperCutter here who knows the brainy PaperCutters. Assuming it's a Xerox EIP 1.5+ platform device:

 

OFFICIAL ANSWER - Your PaperCut reseller should have access to the answer in the install guide.

 

UNOFFICIAL ANSWER - That answer probably looks something like this (don't tell anyone though):

 

 

To customize the logo on the headers of all PaperCut MF screens

 

1. Create the device's header logo as per the following specifications:

 

• Image height = no more than 55 pixels
  
• Image width = no more than 360 pixels
  
• Image file format = .png
  
• Image filename = logo.png
  
• Image file location = [PaperCut Install Location]\server\custom\web\device\xerox\1.5\
  

2. Log in to the device as a test user (simple test user).

 

3. Verify that the device's header logo is as required.

 

 

 

Hope that helps!

 

That worked a treat, thanks so much!