HP ProDesk 400 G6 Desktop Mini PC

[JVSuper]

Hello,

 

Struggling to work out how to setup the BIOS for legacy boot. Can see no obvious options and googling comes up with nothing I can find.

 

Would really appreciate some advice

 

Thanks

[glen_j]

Try turning secure boot off. This should enable legacy boot if I remember correctly.

[JVSuper]

Thank you for the reply glen_j.

 

Secure boot is off I'm afraid and the option has not appeard, any further suggestion would be greatly appreciated

 

Jo

[networkmangler]

We have some of the HP ProDesk 600 G3 Mini's so the BIOS settings might be different but the settings we change are:

 

Advanced > Boot Options > UEFI Boot order > Untick box

 

I then check that just legacy is enabled under

 

Advanced > Secure Boot Configuration > Configure Legacy Support or Secure Boot

 

Also when booting to the network I use F9 and then select the network. When I use F12 I normally accidently press it too many times and cancel the PXE boot

[JVSuper]

thank you networkmangler, I have checked the bios as you suggested and it is definately a different bios. I have looked everywhere for anything that suggests Legacy Support and I cannot see it.. Starting to think its just not there

[networkmangler]

thank you networkmangler, I have checked the bios as you suggested and it is definately a different bios. I have looked everywhere for anything that suggests Legacy Support and I cannot see it.. Starting to think its just not there

It's worth seeing if there is a BIOS update. It might be that you have an earlier version of the BIOS and the setting is not available

[Zourous]

Have you checked for this "Compatibility Support Module (CSM)" in the menu's somewhere

[JVSuper]

Good thinking, I dhave done that now but alas no change

 

- - - Updated - - -

 

Thanks for the reply, cant find anything entitled CSM. In fact the bios is very sparce, not many options at all. So frustrating.

 

Regards