snagrat Posted July 30, 2019 Posted July 30, 2019 Have just setup VLANs and all is working except for the Ruckus APs as they do not get an IP address. DHCP Relay is definitely working as if I plug my laptop in it works. I also have plugged in a CCTV camera and it gets an address. It is just Ruckus APs that will not get an IP and therefore not see the controller so none of my WiFi is working. The port is a Trunk port, with the native VLAN set to the WirelessMgmt VLAN. Has anyone else had this issue?
Boredguy Posted July 30, 2019 Posted July 30, 2019 Is your zone director also set on a Trunk, along with any switch to switch connections?
snagrat Posted July 30, 2019 Author Posted July 30, 2019 Yes ZD is trunk and all connections are. I’m assuming because other devices connect and get an IP correctly then all the ports must be configured correctly?
Boredguy Posted July 30, 2019 Posted July 30, 2019 well it depends on what is meant to be assigning the IP address to the AP's. If your DHCP server is also not on your WirelessMgmt VLAN......
snagrat Posted July 30, 2019 Author Posted July 30, 2019 DHCP server is not on wirelessmgmt vlan, it is on server vlan. I’ll double check the setting tomorrow.
Davit2005 Posted July 31, 2019 Posted July 31, 2019 Just to confirm, Is the laptop/IP camera you are testing getting an IP address on the wireless management vlan?
snagrat Posted July 31, 2019 Author Posted July 31, 2019 Just to confirm, Is the laptop/IP camera you are testing getting an IP address on the wireless management vlan? Yes it is. Therefore to me it is working as expected, just not for the Ruckus APs
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now