LTSC 1809 NPS Not working

[bjantke]

I'm are trialling windows 10 LTSC 1809 Build 17763.134, I cannot get the Computers to connect to wifi using NPS, has anyone experienced this issue

[Davit2005]

What WiFi solution are you running, has it worked on NPS before?

Few things to try

1. Run Wireshark on Server to see if this is getting requests

2. Check for firewall issues

3. Check Radius logs on NPS server, if you have not got logs configured then set them up. A local file based log on the NPS server is good enough but check diskspace.

Edited December 7, 2018 by Davit2005

[bjantke]

We are currently running a CISCO Wireless Controller, NPS is working fine with Windows 7 Devices and other Windows LTSB 1609 Devices

will give the suggestions a go

[csmith0504]

Sorry to bring up a really old thread, we are currently suffering from a similar issue. Did you ever manage to get it working?

[bjantke]

Hi, we changed the EnableActiveProbing in the registry to 0

 

[TABLE=class: subtable]

[TR]

[TD]Hive[/TD]

[TD]HKEY_LOCAL_MACHINE[/TD]

[/TR]

[TR]

[TD]Key path[/TD]

[TD]SYSTEM\CurrentControlSet\Services\NlaSvc\Parameters\Internet[/TD]

[/TR]

[TR]

[TD]Value name[/TD]

[TD]EnableActiveProbing[/TD]

[/TR]

[TR]

[TD]Value type[/TD]

[TD]REG_DWORD[/TD]

[/TR]

[TR]

[TD]Value data[/TD]

[TD]0x0 (0)[/TD]

[/TR]

[/TABLE]

[csmith0504]

Thanks bjantke. We managed to solve it after so long as well, we upgraded our CA cert to SHA256 over SHA1 which was an old one we were using on our NPS and eventually managed to get it working.