MSM 760 Controller and APs with VLANs

[pritchardavid]

Hi there

 

I'm having massive problems with our wireless controller (HP MSM760) for our HP Access Points

 

I am using 4 VLANS

 

VLAN 150 - Management Interface for Access Points

VLAN 160 - Staff WIFI

VLAN 170 - Student WIFI

VLAN 180 - Guest WIFI

 

We are using a Smoothwall Box for our Firewall/Router with the DHCP relay enabled for all of theses VLANS

 

 

The problem we are receiving is that any client devices we connect on any WIFI network get a IP address from VLAN 150 IP range.

 

I have only setup WPA2 to start with only each one

Added Network Profiles for each VLAN and assigned them to the LAN port

Assigned each SSID/VSC to each network profile.

 

The APs and controller are untagged on VLAN 150 and tagged for everything else

 

 

Any ideas what I have done wrong?

 

 

 

Any ideas would be good

 

I can also confirm DHCP work's on each VLAN, tried untagging the port on each VLAN with a laptop and a random switch, got a valid IP address for each one

I think something is wrong on the HP Controller tbh

[ColS]

Hi,

 

Did you define a VLAN in the switch port config or set it to Trunk?