Jump to content

Recommended Posts

Posted

We have an HP ProLiant DL380p Gen8 server that had a failed drive but did not sound any warning and I only found out because I was checking the Smart Storage Administrator software. There should be an option to turn on and off the warning sounds but I can't find it.

 

Does anyone know where it it?

Posted
might be that any sound alert would need to be enabled on the BIOS of the RAID card - old adaptec cards used to be like this and Intel/LSI stuff is still the same i believe.
Posted

There should be a red/amber light on the front of the disk to warn you of a drive failure - on the rack versions at least.

 

My old adaptec RAID card was sounding a beep yesterday after a lengthy power cut.

 

Poo came out.

Posted

Thanks Guys.

 

This is odd as a different drive failed before half term and there was an option to silence the alarm which I did, then another drive went a couple of weeks later but I didn't know about it till I checked Smart Storage Administrator. The server sits on the bench facing into a corner making it difficult to see the drive lights so will look at turning it over the Easter holidays.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...