HP ProCurve 2510 InterVLAN Communication

[rom1984]

Hi,

 

I have a HP ProCurve 2510 with PC-1 and PC-2.

 

PC-1 has an ip address of 192.168.2.1 /23

PC-2 has an ip address of 192.168.4.1 /23

 

Does anyone know how to configure the switch so I can communicate between the two devices? I've created VLAN10 and VLAN20 and added the ip address in. I can ping from the switch to both devices but can not ping between PC-1 and PC-2

 

Any help would be appreciated!

Thanks

[LytchettNM]

The ProCurve 2510 is a layer 2 switch so it's can do routing, you will need a router device to router between the 2 subnets.

[rom1984]

Yes thank you for the reply you are right! I took the wrong switch out of the cabinet was using the 2510 when I should have picked up the HP 2920 do'h!

 

Thanks again