pooley Posted June 5, 2017 Posted June 5, 2017 Have had same issues re: Konica printing, enabled scan to FTP as a workaround.
JRA Posted June 5, 2017 Posted June 5, 2017 Backuppc (for all the Linux folks) doesn't seem to work. Adding "-m SMB2" into the Xfer options for each host gets you a bit further, but still errors out. I'll try with rsync tomorrow, manual backups for now. Bleh. :/
JRA Posted June 6, 2017 Posted June 6, 2017 Backuppc (for all the Linux folks) doesn't seem to work. Adding "-m SMB2" into the Xfer options for each host gets you a bit further, but still errors out. I'll try with rsync tomorrow, manual backups for now. Bleh. :/ Also worth mentioning this disabling SMBv1 business does over lots of old-ish Linux bits and bobs, but sticking "min protocol = SMB2" in the global section of smb.conf (back that up first then restart samba service) on anything half-recent sorts that.
3s-gtech Posted June 7, 2017 Posted June 7, 2017 My expensive paperweight collection: All completely useless now - the Linkstation even decided to completely die after being shut down to remove. Won't fire up now. Won't miss any of them!
synaesthesia Posted June 7, 2017 Posted June 7, 2017 We have a large pile of those terastations still I don't think we'll get rid just yet, they're just too damn handy, however I know there's 3rd party firmware available for them which I believe enables a lot more.
timbo343 Posted June 7, 2017 Author Posted June 7, 2017 We have a large pile of those terastations still I don't think we'll get rid just yet, they're just too damn handy, however I know there's 3rd party firmware available for them which I believe enables a lot more. What's the 3rd party firmware for these? Would be interested to know and see if it works.
synaesthesia Posted June 7, 2017 Posted June 7, 2017 Will have to do some digging, I found them years ago but never bothered with them as we had too much stuff to lose on the stations.
3s-gtech Posted June 7, 2017 Posted June 7, 2017 I have seen various hacks done via NASCentral - unfortunately my Linux capabilities are best described as weak, and the steps required to hack them are beyond me. I've already salvaged some 2TB WD Red disks from one to populate a new Synology, with plenty left, so it won't all go to waste.
synaesthesia Posted June 7, 2017 Posted June 7, 2017 NASCentral rings a bell so it could well have been one of those. There was certainly a lot of TFTPing and the likes involved
ollyyllo Posted June 9, 2017 Posted June 9, 2017 Just had the latest firmware for Kyocera 4551ci and 3051ci installed. Scan to folder is working now with SMBv1 disable on the fileserver. 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now