angrycomputingteacher Posted January 31, 2017 Posted January 31, 2017 Hello, I run a workgroup of computers with something like 90 users. All home drives and areas are all stored on a NAS. I would much rather run a domain although we don't have the money or time to maintain this so for the foreseeable future were using workgroups. My only problem with workgroups is managing users. I would like to create a batch script that is scheduled at startup to load any new users created onto the computer. Although I'm not sure on how to achieve this. I also would need to assign Staff to their extra group. Thanks in advance.
mrwoberts Posted February 1, 2017 Posted February 1, 2017 (edited) Not entirely sure what you mean here. is it, you want to create a local account on every PC, based on a 'list' of users - perhaps a text file somewhere? Or, do you mean, create a list of user accounts on a particular PC and store that somewhere? You know, a domain controller wouldn't take too much setting up, and you could pretty much use a regular PC if you had to. Edited February 1, 2017 by mrwoberts
angrycomputingteacher Posted February 1, 2017 Author Posted February 1, 2017 Yes, I would like to be able to create local users from data in a text file that also assigns them to a group. I have thought about a domain enviromenyt but the SMT want it the way it is.
mrwoberts Posted February 1, 2017 Posted February 1, 2017 Okay, is this what you want to do? I'm not including the part where you fetch the text file and compare the users against the desired users list... LAPTOP-012 (Existing user accounts) Fred (administrators) Bob (users) Jenny (users) Sally (administrators) You want to create two new users on that PC, one admin, the other a standard user... Tony (administrators) Matthew (users) To do that you would issue the following commands... net user /add Tony net user /add Matthew net localgroup Administrators Tony /add That would be the batch script way, but a VB or Powershell script would probably be better. Here's a VB script for example...
angrycomputingteacher Posted February 1, 2017 Author Posted February 1, 2017 I've tried the following, @echo off net localgroup /add Staff net localgroup Staff TestUser1 password /add net localgroup Staff TestMeNow1 password2 /add When I ran as admin on one of the machines it closed straight away. However tomorrow I will attempt using a powershell script.
mrwoberts Posted February 1, 2017 Posted February 1, 2017 (edited) When I ran as admin on one of the machines it closed straight away. However tomorrow I will attempt using a powershell script You need to place a pause at the end of your script, otherwise it will close straightaway - the command is not very difficult for the PC so it finishes almost instantly. If you'd rather it just waited for ten seconds then closed, then add this instead timeout /t 10 On closer inspection, you're not actually adding the users TestUser1, or TestMeNow1, like I showed you above. All you've done is create a group then tried to add two (existing) users to it. Is that what you wanted? Edited February 1, 2017 by mrwoberts
mrwoberts Posted February 1, 2017 Posted February 1, 2017 (edited) Here is the correct version of your script @echo off REM ## Create a new Staff group ## net localgroup /add Staff REM ## Create two new users ## net user TestUser1 password /add net user TestMeNow1 password2 /add REM ## Add new users to the Staff group ## net localgroup Staff TestUser1 /add net localgroup Staff TestMeNow1 /add pause Edited February 1, 2017 by mrwoberts
angrycomputingteacher Posted February 2, 2017 Author Posted February 2, 2017 I've this script and it worked. Thanks for you help
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now