nicholab Posted January 11, 2017 Posted January 11, 2017 I have a Canon photocopier that warns of a duplicate ip address even when on dhcp. I have tried changing the address but the warning stays. I tried pinging the address and nothing any suggestions anything with the same address.
MatthewL Posted January 11, 2017 Posted January 11, 2017 What happens if you give it a static IP not in the DHCP scope do you get the same message? Presume the machine has had a full reboot including power off at the wall? I'm not familiar with the devices but can you reset the network card on it?
nicholab Posted January 12, 2017 Author Posted January 12, 2017 Yes same message what every address I try.
MatthewL Posted January 12, 2017 Posted January 12, 2017 What about if you give it an IP and a laptop one in the same range and just put a cable between the two? Something I suspect is wrong with the copier.
nicholab Posted January 13, 2017 Author Posted January 13, 2017 I am waiting for the IT service team member of the copier company to come out an have a look. I did try putting the mac address into DHCP and also put the IP address on the laptop and plugged into the network port where the copier goes and that worked fine.
nicholab Posted January 13, 2017 Author Posted January 13, 2017 I am waiting for the IT service team member of the copier company to come out an have a look. I did try putting the mac address into DHCP and also put the IP address on the laptop and plugged into the network port where the copier goes and that worked fine. They tested the copier and it will not load the firmware as the network is bust so they have now ordered a new main board for the copier.
MatthewL Posted January 13, 2017 Posted January 13, 2017 At least you have got to the bottom of it now.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now