enjay Posted August 3, 2016 Posted August 3, 2016 I'm trying to install Spiceworks Network Monitor, but it won't go on my preferred server because something has else is using the port. A quick bit of reading suggests this is Apache Tomcat, which is certainly installed on that server but I am unsure why. Is there a way of seeing why Tomcat is installed and/or what is using it?
Steve21 Posted August 3, 2016 Posted August 3, 2016 Not sure in regards to finding out, but you got HP switch managers at all? IMC/PCP etc found that had issues with Spiceworks on the same one Steve
enjay Posted August 3, 2016 Author Posted August 3, 2016 I think I've found it, there are actually two things using Tomcat, so it might be easier to stop them, install Spiceworks then move Spiceworks to a different port. Any suggestions for suitable/safe ones?
enjay Posted August 3, 2016 Author Posted August 3, 2016 8080 or 8443 are usually good ports to go with. Spiceworks offers me those ports as the defaults during install then goes on to tell me 8005 is in use. I found a semi-helpful post on Spiceworks' forum telling me to stop Tomcat, install Spiceworks then dig around in the config to move the Spiceworks port but it didn't say where the config is!
MatthewL Posted August 3, 2016 Posted August 3, 2016 Not a print sever is it? Some versions of PCounter used Tomcat.
enjay Posted August 4, 2016 Author Posted August 4, 2016 No, I've found it. It is two things; one is eCopy ShareScan on our MFDs and the other is the Access-It library catalogue. Now Spiceworks is installed, can I just leave all three things using that port? It wouldn't install while the port was locked, but would it be happy now? I'm thinking if ShareScan and Access-It can both co-exist on that port, why not Spiceworks too?
mavhc Posted August 4, 2016 Posted August 4, 2016 No, the other 2 are co-existing because TomCat is doing it, unless Spiceworks also uses TomCat, which it doesn't afaik, but even then you'd need it to configure the existing installation of it.
enjay Posted August 4, 2016 Author Posted August 4, 2016 No, the other 2 are co-existing because TomCat is doing it, unless Spiceworks also uses TomCat, which it doesn't afaik, but even then you'd need it to configure the existing installation of it. Ah, okay. Although I think Spiceworks Network Monitor does use Tomcat...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now