BT versatility extension help

[1plus2]

Hi been looking at how to run extensions from an extension already on the wall to another area basically the faceplate on the wall has 2 RJ sockets 1 for the internet and 1 to run a phone via a pabx master adapter but these are not interchangeable ie they don't work in by plugging into the others socket.

 

Is there anyway of running a setup where from this extension faceplate he can run 3 or 4 extensions to another area i was trying to look for some sort of adapter/coupler that plugs into the female end of the pabx master adapter which then has 3 or 4 sockets to run individual 631A cables to the phones in a diff area.

 

Something like the pic below that plugs in the PABX master adapter female end then allows to run the 631a cables from it, the pic is for RJ sockets and it would need to be 631A 6 pin sockets, or can it be that running 3 or 4 separate pabx master adapters from the pic then running the 631A cables from the master adapters separately ie giving 4 runs to another area.

 

 

 

Edited June 26, 2016 by 1plus2

[john]

Extensions need to go back to the main system so you won't get anything to do that its a cable back to the main system and to a socket etc...