Ric_ Posted January 28, 2008 Posted January 28, 2008 I have just ead an interesting article on the BlueSocket website (see http://bluesocket.com/Collateral/Documents/English-US/Bluesocket%20Position%20Paper%20-%20PoE%20and%20802.11n.pdf ) about 802.11n power requirements. This is something that I hadn't given any thought to but makes perfect sense. For those currently speccing wireless systems, this is possibly something that you need to ask your potential vendors. 3
Geoff Posted January 28, 2008 Posted January 28, 2008 Makes sense. It's pretty shocking that some vendors can't stay within the 12W power limit though.
contink Posted January 28, 2008 Posted January 28, 2008 Makes sense. It's pretty shocking that some vendors can't stay within the 12W power limit though. ... and this weeks award for worst pun goes to... Anyway, back on topic... Thanks for that Ric... very timely as I was just getting into the 11n side of things with AP's.
spc-rocket Posted January 28, 2008 Posted January 28, 2008 Hi, Cisco have a power injector that will supply more power than 802.3af for thieir draft 802.11n access points - Aironet 1250, this is a properitory standard by cisco and provides up to 18W or so. I think the IEEE is working on POE Plus standard that will allow for more power to be put through the cable. Cisco own standard is called Enhanced PoE. While on the subject of 802.11n i think its also woth thinking about allowing a gigabit ethernet connection to the access point since 802.11n provdies more bandwidth than the other standards. Ash.
greenfieldsupport Posted January 28, 2008 Posted January 28, 2008 hmm is the more power used for the electronics side... or the child-brain-frying side ?? Im guessing that if they still run at 2.4GHz they will still have to adhere to the transmit power limits yes?
gaz350 Posted January 28, 2008 Posted January 28, 2008 im guessing that AP's that can run at both 2.4 and 5ghz(at the same time) require double the amount of antennae will also need more power too.
contink Posted January 28, 2008 Posted January 28, 2008 hmm is the more power used for the electronics side... or the child-brain-frying side ?? Im guessing that if they still run at 2.4GHz they will still have to adhere to the transmit power limits yes? In that respect the article was quite useful.. I'd check it out as it provides a lot more intel than I could paraphrase here but to answer the question, CPU, RAM, etc... and the choices made seem to be the thrust of where most of the extra power goes. As regards n providing 11a and 11g... As noted in the article the suggestion is that you'd have to choose with some providers solutions, not have both.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now