colingbradley Posted December 5, 2007 Posted December 5, 2007 My HD crashed probably due to a bad sector or something. I could not boot up so installed a new HD and put the old one in a USB case and connected it to my portable to see if i could read any data. When I power up the old drive, it crashes and reboots my portable which then wants to check the C: drive. tried again and crashed the portable again. Looked at File Scavenger 3 but unable to use that as I cannot even get the old drive up and running. Portable is XP SP2. Old drive was XP SP2. Anyone got any ideas other that paying my hard earned to a disk recovery firm? TIA, Colin
Midget Posted December 5, 2007 Posted December 5, 2007 what type of drive is the old drive? does it make any clicking noises?
FN-GM Posted December 5, 2007 Posted December 5, 2007 Whets going on today? This is the 3rd post about buggered hard drives! Mine at work also went today, it was only 2 week old Z
colingbradley Posted December 5, 2007 Author Posted December 5, 2007 No clicking noises, seems to spin up normally with just a few sounds that may have been there before but I would not have heard. Now it is on the USB Caddy, I can hear it more clearly.
iatkinson Posted December 6, 2007 Posted December 6, 2007 I've recovered data from faulty drives before by booting up my laptop with Knoppix and then connecting drive with easy ide cable (similar to usb caddy) http://www.knopper.net/knoppix/index-en.html
ICT_GUY Posted December 6, 2007 Posted December 6, 2007 I've recovered data from faulty drives before by booting up my laptop with Knoppix and then connecting drive with easy ide cable (similar to usb caddy) http://www.knopper.net/knoppix/index-en.html yup best way to get your files off. Otherwise use a USB IDE adapter, our local computer shop does one for £20 and it has never crashed my computer and it needs no drivers. Its a lead with ide at one end and usb at the other.
colingbradley Posted December 6, 2007 Author Posted December 6, 2007 This will be first foray into the Linux world....gritting teeth....how and where do you connect the "easy IDE cable"? Does it have power for the old drive?
colingbradley Posted December 6, 2007 Author Posted December 6, 2007 likewise the IDE USB connector, where is the power supplied from?
ICT_GUY Posted December 6, 2007 Posted December 6, 2007 It comes with its own power supply, just plug and pray. (sorry) Not used this one, but its the same kind of thing. Plus SATA For teh win! http://www.maplin.co.uk/Module.aspx?ModuleNo=48965&C=Maplin&U=SearchTop&T=usb%20ide&doy=6m12
Halfmad Posted December 6, 2007 Posted December 6, 2007 IDE USB generally takes power from the USB bus sometimes via one or two USB cables, my new external USB HDD drives are all like this, older ones had an AC adaptor for power.
colingbradley Posted December 6, 2007 Author Posted December 6, 2007 Just a thought, I did not change the jumpers on the old drive before putting it into the USB Caddy. Is that important? It was of course the master.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now