[sccm 2012] Media set not prompting for next disk

[clareq]

I can't get Toshiba A9 laptops to build via PXE, so I thought I would build a media set and build them from DVD, until I get a chance to troubleshoot the PXE issue. So I've built a Task Sequence Media set, which runs over 3 DVDs. The system boots successfully from disk 1, formats the drive, then fails. Looking at the logs it's looking for the default wim image. The problem is, that image is on DVD 2, and it hasn't asked me to change disks. Have I missed something?

[free780]

Why not just make a boot CD that pulls the image from your dp?

[clareq]

Because the problem is with the network - although I have the correct drivers in, the link drops half way through the build, whether I PXE or CD boot. All other machines build with no problems, it's only the Toshiba Tecra A9 I have problems with.

[free780]

Have you tried adding nic drivers to the boot image?

[clareq]

Yes, I've done all the obvious things - and as I said - it connects initially, then drops the link - I can press F8, and have a ping going and see it stop when I select the TS - whichever TS I select.