Jump to content

Remote Desktop: Mouse Won't Move Down Screen


Recommended Posts

Posted

I use remote desktop to connect to our servers. It has been working well until Monday of this week. I find now that the mouse will not go below about 1/4 above the taskbar at the bottom of the screen. This is happening for only one of the server connections. I have restarted the server and my workstation to no avail. What else can I do?

 

Servers: Windows server 2003 SP1

Workstation: Windows XP Pro: SP2

 

Remote Desktop version: 5.2.3790.0

Posted
try adjusting the resolution in the remote desktop settings. Change it to something then change it back. I've had issues with not being able to click start on sessions because it hasnt detected the resolution correctly.
Posted
The current version of Remote Desktop is v6. Have you tried updating?

 

I have tried that now. The system does not allow the upgrade [see picture] and I can't find where to uninstall the current version before installing the new one [looked in Add or Remove Programs and Add/Remove Windows Components]

 

try adjusting the resolution in the remote desktop settings. Change it to something then change it back. I've had issues with not being able to click start on sessions because it hasnt detected the resolution correctly.

 

Adjusting the screen res does not do it either. Just tried it. :-(

remote_desktop_update_error.jpg

Posted
Hmm, I don't know about that. I've never tried to install the client manually, rather I pushed it out with WSUS. Which worked fine.
Posted
Hmm, I don't know about that. I've never tried to install the client manually, rather I pushed it out with WSUS. Which worked fine.

 

Ah, we don't have an update server here. Windows Update? I will give it a go now.

Posted
I expect so, it'll probably be an optional download though.

 

Nope. The download has begun and the Remote Desktop update is not in there. The only optional download is Root Certificates Update. Looks like I might be stuck then?

Posted (edited)

OK. Cracked it!

 

I removed the tree view and saved the changes, connected to the problematic server and the mouse was responding properly. I closed down Remote Desktop saving the changes, went back in again and checked the view/connection. Still working OK. Restore the views of the other servers. Check connections. All OK. Close down again, saving changes and go back in again and do another round of checks. All OK.

 

But what caused it in the first place. I haven't made any changes to this station in about a week!

Edited by 6Foot2
Correct spelling mistake.
Posted
Clearly, it was imps.

 

Hmm. Imp: Definition:

 

1. A mischievous child.

2. A small demon.

 

Source: http://www.answers.com/imp&r=67

 

A mischievous child: I would not allow 'A mischievous child' in the Network Support office unattended to tamper with my station.

 

A small demon: Do these even exist? :wink: Even if they were to exist would they get past my security? I think not! :wink:

Posted
A small demon: Do these even exist? :wink: Even if they were to exist would they get past my security? I think not! :wink:

 

Please verify you have no hardware running BSD. :)

  • 4 months later...
Posted (edited)
Please verify you have no hardware running BSD. :)

No hardware running Berkeley Software Distribution.

 

However we might have:

 

Bad System Design [Matter of opinion]

Blue Screen Of Death [sometimes]

Bad School Day [Almost every day]

 

Other possibles for BSD [not limited to software/hardware issues] which did not make it into the list above:

 

Bachelor of Science in Design

Back Seat Driver [almost any passenger]

Ballistic-Electron Surface-Emitter Display

Bark Spectral Distortion

Baseline System Description

Battle Simulation Division

Battle Staff Director

Battlefield Simulation Display

Battlefield Synchronization Demonstration

Battlespace Dominance

Bed-Side Drainage (medical; gravity drainage of fluids to bag)

Belgian Shepherd Dog

Bermuda Shorts Day (University of Calgary)

Bidirectional Sequential Decoding

Bill of Sale Deed

Blind Spot Detection

Blind, Stupid and Desperate [My favourite out of the also rans I think]

Blueshout Designs

Breach of Statutory Duty

Business and Sustainable Development :)

Edited by 6Foot2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...