Ruckus - different VLAN for each SSID

[localzuk]

I'm in the middle of changing our wifi setup from 'everyone under one SSID' to a setup of:

 

1. 802.1x SSID

2. Captive portal SSID

3. Guest wifi

 

Each of these SSIDs has its own VLAN and as such I have set the ports the APs plug into set to untagged for vlan 1 (management interface) and tagged for VLAN 115,116 and 117.

 

However, I am hitting a snag - all the instructions to do this stuff say the same thing - go into Configure -> WLANs -> Edit the wlan in question -> Advanced -> VLAN section -> Tick the 'Attach VLAN Tag' option and put the VLAN ID in the box.

 

However, this doesn't exist! There is no VLAN section or 'Attach VLAN Tag'. Only "Access VLAN".

 

How do I do this? I'm running a ZD1125 with firmware 9.6.0.0 build 267.

[localzuk]

Well, I have it communicating via the 3 VLANs correctly now except one thing - it is failing to issue the default gateway correctly.

 

I have option 003 set up pointing to the router IPs (all the same router, different IP for each VLAN), exactly the same as the rest of the scopes (all of which work for their wired VLAN setups).

 

But the clients always get an IP of 0.0.0.0 and not the router IP.

 

What am I doing wrong?

[localzuk]

Well, that was dumb of me... I had the router address included in the DHCP lease range. Derp.