talksr Posted May 2, 2013 Posted May 2, 2013 Hi, any advice on this would be really apreciated: I have a standard short throw integrated smart board. It has worked well in the past on Windows XP and Windows 7 systems. Have put on a brand new Windows 8 HP laptop and the board is interactive, but the green light is flashing. The smart driver software is detecting no IWB and no matter how many times I remove it from Dev Manager, reinstall drivers etc, it is still flashing green and not being detected by software. Have even tried different cables. I believe the only way it is interactive is via the Microsoft Pointers application (or whatever it is called).
ass17 Posted May 2, 2013 Posted May 2, 2013 I have the same issue on windows 7, but after I restarted the computer after the install, the smart service started and got a solid green light.
ass17 Posted May 2, 2013 Posted May 2, 2013 As far as I'm aware the new 11.1 version is windows 8 compatible.
talksr Posted May 3, 2013 Author Posted May 3, 2013 Good morning, thanks for your posts. I have tried rebooting several times, checking BIOS in case of any USB settings, but I am getting nowhere. I have spent a considerable time on the laptop. My next option was to try another laptop on the board, but I already know that the old laptop worked fine on it with no problems at all. I was a little concerned that the AV company who had installed this and others had used quite long, thin usb cables - not of great quality, so I used some thicker wires yesterday, but made no difference. I am running out of options!
timp Posted May 4, 2013 Posted May 4, 2013 Have you tried it with a shorter USB cable? Interactive Whiteboards are notoriously fickle with USB cables, long ones (thick or thin) can cause issues. If cable runs are over 5m then you should always use a powered extender (lindy ones are good)
free780 Posted May 4, 2013 Posted May 4, 2013 Check the feature on the projector menu for the powering up of use sockets depending on the input source vga dvi etc. I had this issue on 7 due to the signal being dropped l. Only affected a few computers.
w-clarke101 Posted May 4, 2013 Posted May 4, 2013 smart board don't support windows 8 at this time. Read it some where on SB website when I was trying to install it and get working.
ass17 Posted May 4, 2013 Posted May 4, 2013 smart board don't support windows 8 at this time. Read it some where on SB website when I was trying to install it and get working. Wrong, read my previous post and the system requirements at the following link: http://smarttech.com/gb/Support/Browse+Support/Download+Software/Software/SMART+Product+Drivers/SMART+Product+Drivers/SMART+Product+Drivers+11_1+Win
w-clarke101 Posted May 5, 2013 Posted May 5, 2013 Wrong, read my previous post and the system requirements at the following link: 11.1 for Windows - SMART Technologies Cool new updates! tried this at the start of March, Will get it install.
talksr Posted May 7, 2013 Author Posted May 7, 2013 Thanks to everyone for your posts. I will give the 11.1 drivers a go, although I did check my drivers were fully up to date. Other than that, I will give the cables another check. I find with these newer boards, there are cables stuffed behind the board all over the place, although I guess it depends on the way they are installed. I am not due to be back in the room in question until Thursday, but will let you know how I get on!
JonT1971 Posted June 16, 2013 Posted June 16, 2013 I tried the link you posted, but it doesn't lead to anything. According to the Smarttech website, the latest version doesn't support Windows 8. It does claim that 11.1 does support Windows 8, but I've found that as soon as I install it everything on my laptop goes haywire, including not being able to shut it down. The problems disappear as soon as I uninstall it. With the school year almost over I'm inclined to do without the SmartTech software for the next week and revisit it in the fall.
Michael Posted June 16, 2013 Posted June 16, 2013 When installing Smart Notebook 11 on Win 7, the green LED on the board will flash when at the login screen. When logged in, you'll then get a solid green light. This is normal behaviour. The latest Smart Notebook 11 SP1 does not fully support Windows 8, but does work OK on Win 7 SP1 (in my testing): Taken from Smart: In the Windows 8 operating system, icons for all SMART programs appear in the Start screen, creating a cluttered appearance. SMART Board® 400 series interactive overlays don’t support multitouch gestures on the Windows 8 operating system. You’re unable to insert emoticons and other graphical characters into .notebook files using the Windows 8 operating system’s virtual keyboard. You’re unable to deploy the Education Software Installer MSI file by command line in the Windows 8 operating system.
Michael Posted July 4, 2013 Posted July 4, 2013 Smart Notebook 11.2.637.0 has been released and is available here (455MB). As far as I can make out, this seems to fully support Windows 8. Maybe someone on Edugeek can test this for certain?
sted Posted July 5, 2013 Posted July 5, 2013 Smart Notebook 11.2.637.0 has been released and is available here (455MB). As far as I can make out, this seems to fully support Windows 8. Maybe someone on Edugeek can test this for certain? but dosent support older "black" smartboards I believe
Michael Posted July 5, 2013 Posted July 5, 2013 I've read the release notes... where does it quote not supporting the older black whiteboards or is this only on Windows 8?
sted Posted July 5, 2013 Posted July 5, 2013 I've read the release notes... where does it quote not supporting the older black whiteboards or is this only on Windows 8? not sure it mentions it but someone at work found out the hard way
trigster79 Posted September 8, 2013 Posted September 8, 2013 not sure it mentions it but someone at work found out the hard way Hi, Have Smartboard working all fine with 11.3 on Windows 8 on older 'black' 500 series smartboard. Just needed to manually install driver for the old serial to usb cable on these which are not supported anymore by smart. Got them from pnpdriver folder from older laptop still running version 10. (Pnpdrivers64 for 64 bit) That's within program files/smarttechnologies folders. Just direct device manager there. Took me a few days of trying different versions and thinking was going to need new boards but all working tip top green light now. Hope this helps someone.
Blue_Cookeh Posted September 9, 2013 Posted September 9, 2013 Also applies to W8, this has worked for our x64 W8 clients. SMART Knowledgebase
SteveSmythe Posted March 28, 2014 Posted March 28, 2014 I'm trying to get my SB540 to work with Windows 8 (per Trigster79's post) but haven't got the older version of the drivers. Can anyone help? Thanks
SteveSmythe Posted April 19, 2014 Posted April 19, 2014 (edited) OK, I found the v10 drivers here and this enabled Windows 8 to recognise the Smartboard using Trigster79's method. I also got the board to work using the old serial cable connected via a female-to-female gender changer and a Prolific USB-Serial cable. The power needs to be connected via the PS2 keyboard connector and a USB adapter. Messy (and uses 2xUSB ports), but might help if you've only got the old serial cable. Edited April 19, 2014 by SteveSmythe
cooperwood Posted March 10, 2015 Posted March 10, 2015 I am not expert but it may be due to the old version of the smartboard software.Whenever i get problem with my smart i just reset it .
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now