I have been trying to get all of our intercom video feeds to be available on the handset in the main reception. However, the handset in the reception can only see the video feeds from the ACU's that are plugged into the same switch as the handset. We have another two intercoms plugged into an ACU that are connected to a different switch and those video feeds do not appear.
If we plug the handset into the switch that has those two intercoms connected to the feeds appear but none of the other intercom feeds from the main reception area appear.
This seems to be a routing issue as plugging the handset directly into our core switch we get nothing.
I have enabled IPV6 on our Access control VLAN on the core switch but this seems to make no difference. I am pretty new to IPV6 and would like to know if anyone can shed some light on any specific IPV6 routing configurations on the core to allow the ipv6 traffic between all switches in the network?
We did have this working at one point when we were using the Zyxel XGS4528F as our core switch (which had minimal IPV6 configuration options, pretty much enable/disable.
We have recently replaced this switch with the newer Zyxel XGS4600-32F and this has much more IPV6 configuration options but after speaking to Paxton they say as long as IPV6 is enabled is "it should just work" with default settings.
