Fps_Chappy

Thanks so much to all of you for your detailed replies. We have third line support from an IT company they have quoted for the work to be done at 4 grand, obviously you dont know the complexity of the network or other factors but as a guess would you say this is reasonable?

Hi, I am just wondering what technical work would need to be carried out from a school technicians point of view when changing the ISP for the school? Thanks

Good morning, One of the classrooms this morning is having a very frustrating problem when trying to calibrate. Each time i open the calibration display and press the first precision point the calibration display turns off and goes back to the PC display. I have noticed that the flame in the top right corner also turns blue (however this might be because i am quite close to it when pressing the first calibration point?) Any help will be much appreciated Thanks

Hi all, I have a problem with a projector in 'the heart of the school'. What it is, is the PC feeds into a splitter box which then sends out a mirrored image of the PC to each dv signal to 1 of the 2 projectors. The problem is one of the projectors is darker than the other. I have replaced both bulbs and colour wheels to no avail. I have also checked all settings match up with the other projector and they do. Nothing seems to help it, the only way i can describe it is as if someones put a dark tinted colour filter over the lense on what of the projectors which is now making the colours less faded and the image not as sharp. I hope someone can help Thanks Scott

We have 6 projectors installed within the 'heart of the school' they have been an absoloute nightmare turning on and off so we installed a peice of offical software from the suppliers of the projector (which is NEC) called 'PC Control Utility Pro 4'. Everything worked fine for around 6 month, I could turn all projectors on and off whenever i wanted smoothly. All projectors are connected via ethernet cable from the main PC into a router with 6 ethernets going out to each projector i have looked at the router everything is flashing green i have also tried resetting the router to no avail. Each projector has been pinged and was looking fine as I received all packets. The software just shows a yellow triangle with an exclamation mark in it saying it cannot connect. Does anyone have any idea's what else I could try to troubleshoot it? Thanks Scott