GeekyGav

Thanks for the reply. Yes, I did wonder about WEEE regs. I understand totally about liability. So, hypothetically... If the recipient was aware of the risks, and signed something to say that the goods were donated out of good faith and the school accepted no responsibility for damages, blah, blah, blah. Where would I stand then? Is there a definite legal requirement for the school to obtain a WEEE disposal certificate? I am reading all sorts of stuff on the net about this not being a legal requirement. Hard to deciphers what the truth is. The kit does contain HDDs, as I said... I am happy to wipe these prior to donation. The liability risks make perfect sense. Just want to be sure about legalities. Thanks for the advice so far.

Hi all, Kind of lost touch with all of the GDPR regs and how to dispose of I.T kit. I have a small amount of kit that I no longer have a use for, and have been apporoached by a member of staff's son who runs his own I.T business. He said he could use the kit for spares. Where do I stand legally if I wanted to 'donate' the kit to said individual? I am understand that the HDDs / configs will need to be securely wiped and can easily do this internally. Do I need to prove that the data was wiped and does the recipient of the kit need to provide anything to the school in terms of paperwork? I am not aware of the recipient being a formal recycling company. Just wanted to be sure where I stand before making any decisions. Many thanks,

Hi all, Does anyone happen to have any spare working Cisco 3750G-48PS switches that they are looking to throw out? I work for a small secondary school with an extremely tight budget and need to expand the network. Worth an ask! Many thanks, Gavin

Thanks very much for your help today! Really appreciate what you did and all your advice. Started to document everything that needs be done going forward. I owe you one!

Oh yes! I see what you mean now! Yes, I deleted config.text and VLAN.dat from both Switch_2 and Switch_3 before configuring this morning. I have seen a VTP domain on one switch. Can't remember where I saw it now but will pull off that config in the morning. Hopefully, once I configure the gig interfaces as trunk tomorrow, the VTP and VLANS will populate.

Forgive my naivety but I'm not sure you mean about being careful with VTP and indication that the switches have not been trunked into the network? What would I look for to suggest this? There are a couple of switches that have been swapped out fairly recently that work as they should but I can only console on to these at the moment. I'll try the configs first thing and let you know. Thanks again!

No probs Switch_2 Switch_2#sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4 Fa0/5, Fa0/6, Fa0/7, Fa0/8 Fa0/9, Fa0/10, Fa0/11, Fa0/12 Fa0/13, Fa0/14, Fa0/15, Fa0/16 Fa0/17, Fa0/18, Fa0/19, Fa0/20 Fa0/21, Fa0/22, Fa0/23, Fa0/24 Gig0/1 1002 fddi-default active 1003 token-ring-default active 1004 fddinet-default active 1005 trnet-default active VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 tr 101003 1500 - - - - - 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 1005 trnet 101005 1500 - - - ibm - 0 0 VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ Remote SPAN VLANs ------------------------------------------------------------------------------ Primary Secondary Type Ports ------- --------- ----------------- ------------------------------------------ Switch_2# Switch_2#sh vtp status VTP Version capable : 1 to 3 VTP version running : 2 VTP Domain Name : VTP Pruning Mode : Disabled VTP Traps Generation : Disabled Device ID : 00D0.BAB6.A400 Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00 Local updater ID is 0.0.0.0 (no valid interface found) Feature VLAN : -------------- VTP Operating Mode : Server Maximum VLANs supported locally : 1005 Number of existing VLANs : 5 Configuration Revision : 0 MD5 digest : 0x7D 0x5A 0xA6 0x0E 0x9A 0x72 0xA0 0x3A 0xF0 0x58 0x10 0x6C 0x9C 0x0F 0xA0 0xF7 Switch_2# Switch_3#sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4 Fa0/5, Fa0/6, Fa0/7, Fa0/8 Fa0/9, Fa0/10, Fa0/11, Fa0/12 Fa0/13, Fa0/14, Fa0/15, Fa0/16 Fa0/17, Fa0/18, Fa0/19, Fa0/20 Fa0/21, Fa0/22, Fa0/23, Fa0/24 Gig0/2 1002 fddi-default active 1003 token-ring-default active 1004 fddinet-default active 1005 trnet-default active VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 tr 101003 1500 - - - - - 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 1005 trnet 101005 1500 - - - ibm - 0 0 VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ Remote SPAN VLANs ------------------------------------------------------------------------------ Primary Secondary Type Ports ------- --------- ----------------- ------------------------------------------ Switch_3# Switch_3#sh vtp status VTP Version capable : 1 to 3 VTP version running : 2 VTP Domain Name : VTP Pruning Mode : Disabled VTP Traps Generation : Disabled Device ID : 0050.0F48.C900 Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00 Local updater ID is 0.0.0.0 (no valid interface found) Feature VLAN : -------------- VTP Operating Mode : Server Maximum VLANs supported locally : 1005 Number of existing VLANs : 5 Configuration Revision : 0 MD5 digest : 0x7D 0x5A 0xA6 0x0E 0x9A 0x72 0xA0 0x3A 0xF0 0x58 0x10 0x6C 0x9C 0x0F 0xA0 0xF7 Switch_3# I don't get any messages that cause alarm when connecting using console. Yes, that's right... Switch_1 Gi0/4 >>> Switch_2 Gi0/1 then Switch_2 Gi0/2 >>> Switch_3 Gi0/1 Thanks very much for your help, I will have to try the interface changes in the morning when I am back at work. Will definitely configure port fast on the access ports.

Yes, no problem... Switch_2 As follows... SW_02#sh run Building configuration... Current configuration : 1366 bytes ! version 12.2 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname SW_02 ! enable secret 5 $1$dNw1$7RyMWhj9MXT2MVI6NiYfO1 enable password ****** ! no aaa new-model ip subnet-zero ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! interface FastEthernet0/1 ! interface FastEthernet0/2 ! interface FastEthernet0/3 ! interface FastEthernet0/4 ! interface FastEthernet0/5 ! interface FastEthernet0/6 ! interface FastEthernet0/7 ! interface FastEthernet0/8 ! interface FastEthernet0/9 ! interface FastEthernet0/10 ! interface FastEthernet0/11 ! interface FastEthernet0/12 ! interface FastEthernet0/13 ! interface FastEthernet0/14 ! interface FastEthernet0/15 ! interface FastEthernet0/16 ! interface FastEthernet0/17 ! interface FastEthernet0/18 ! interface FastEthernet0/19 ! interface FastEthernet0/20 ! interface FastEthernet0/21 ! interface FastEthernet0/22 ! interface FastEthernet0/23 ! interface FastEthernet0/24 ! interface GigabitEthernet0/1 ! interface GigabitEthernet0/2 ! interface Vlan1 ip address dhcp ! ip classless ip http server ip http secure-server ! ! control-plane ! ! line con 0 line vty 0 4 password ****** no login line vty 5 15 password ****** no login ! end SW_02# Switch_3 as follows... SW_03#sh run Building configuration... Current configuration : 1366 bytes ! version 12.2 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname SW_03 ! enable secret 5 $1$dNw1$7RyMWhj9MXT2MVI6NiYfO1 enable password ***** ! no aaa new-model ip subnet-zero ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! interface FastEthernet0/1 ! interface FastEthernet0/2 ! interface FastEthernet0/3 ! interface FastEthernet0/4 ! interface FastEthernet0/5 ! interface FastEthernet0/6 ! interface FastEthernet0/7 ! interface FastEthernet0/8 ! interface FastEthernet0/9 ! interface FastEthernet0/10 ! interface FastEthernet0/11 ! interface FastEthernet0/12 ! interface FastEthernet0/13 ! interface FastEthernet0/14 ! interface FastEthernet0/15 ! interface FastEthernet0/16 ! interface FastEthernet0/17 ! interface FastEthernet0/18 ! interface FastEthernet0/19 ! interface FastEthernet0/20 ! interface FastEthernet0/21 ! interface FastEthernet0/22 ! interface FastEthernet0/23 ! interface FastEthernet0/24 ! interface GigabitEthernet0/1 ! interface GigabitEthernet0/2 ! interface Vlan1 ip address dhcp ! ip classless ip http server ip http secure-server ! ! control-plane ! ! line con 0 line vty 0 4 password ***** no login line vty 5 15 password ***** no login ! end SW_03#

Hi all, Got a bit of a weird one here... Just had two switches fail on me. Cisco 3560s. (Switches 2 and 3) Switch layout as follows... Core <<< >>> Switch_1 <<< >>> Switch_2 <<< >>> Switch_3 Only been doing the job for a week with no handover documentation from the previous. No passwords for switches and have tried to do password recovery without any luck. Anyway... managed to find two new 3560s. Plugged them in with fibre links, configured both switches a very basic config using the startup wizard. Hostname. Set the enable and VT passwords. Vlan1 as management No further VLANS added. No configuration changes made to ports. Now, here is where the problem starts on both switches 2 and 3. I initially set up Vlan1 to pick up an IP from the DHCP Server (Windows 2012) - Just to ensure connectivity! No good. Set Vlan1 with a static IP, subnet, etc. Can't ping my way through the network or any of the other switches. CDP Neighbors shows the correct devices at either end of the fibre links. No IP addresses leased to client devices. However... If I remove the switch from the cab and plug it into a directly into a known working switch via Ethernet, it'll pick up an IP address and issue addresses to clients. What am I missing here? I can't get into the other switches to see their configs but I know 'Old Switch 2' had its fibre connections set as trunk ports and there were two additional VLANS (10 and 20) but these were not assigned to any other ports. I have configured the fibre interfaces as trunks and checked that these are associated with Vlan1, still no luck. Why would DHCP pass through the Ethernet ports but not the fibre connections? Any help would be greatly appreciated. Gav

Hi all, I am looking to make the push to Office 365 in the near future. Before doing so, I'd like to demonstrate to teaching staff what the product has to offer. We already use a lot of the on-premise features of O365. (Skype for Business, SharePoint 2013, Exchange 2013) so this isn't my main focal point. What I primarily want staff to see is the Microsoft Teams feature of O365. Difficult to do without an environment of our own. Is there anyone out there that can come out and deliver a demonstration and live environment for us to see / try? Many thanks, Gavin

Hi all, My main supplier (Kelway) is hosting an event next Wednesday (29th April 2015) Get yourself signed up! Places are limited! See how iOS can transform education Kelway and Apple would like to invite you to a Seminar with Apple Distinguished Educators (ADEs) at the National Space Centre in Leicester on 29th April. During the day you will hear about the latest ios solutions for the classroom which can help transform the teaching environment and improve learning outcomes for students. You will partake in a series of workshops with professional Education Trainers so you can see the potential of iPad in education for yourself. Lunch will be provided on the day and you will also have the opportunity to have a guided tour around the Space Centre. Please feel free to bring your own iPad to use in the interactive workshops. A number of ipads will be available for those that do not bring their own. Agenda 9.00 Registration/Tea & Coffee 9.30 Kelway Introduction 9.45 Apple in Education 10.10 iPad Transformation 11.15 Why Kelway? 11.30 Break 11.45 iPad Workshop 1 - Neil Emery, Trilby 12.45 Lunch 1.45 iPad Workshop 2 - Abdul Chohan, Thinksimple 2.45 Close To join us at this exclusive event, please register using the link or speak to your Account Manager. All details can be found here... See how iOS can transform education Apple in Education Invitation.pdf

Hi, Yes, I've checked the proxy settings in IE and can browse the web without any problems. Got a NIC in each domain and have tested both proxy addresses just to be sure. Strange thing is... Can't refresh product key data either. Get the same timeout message. Sounds like an internet related issue. Weird!

Hi Chris, Just wondered what you did to resolve this? Not quite sure what you mean by registering the VAMT PS tools? Have exactly the same problem here. Built a new 2012 server with VAMT 3. Was working perfectly until last week and now can only install product keys. Can't activate for some reason. Gav

Just had a thought chaps... Our Folder Redirection policy is set to 'Create a folder for each user under the root path'. Does this actually matter? All users have their home drive set in User Properties and connect to drive H: This has always been the case but wondered if was actually set up correctly by my predecessor.

Mike, This one has me stumped! Folder redirection worked perfectly for us until I had removed permissions from the docs share. Scratching my head is an understatement. Now hitting my skull against the office desk! lol. Can't for the life of me, figure out why my test setup on the same server with the same permissions, GPOs, etc works... and current setup doesn't!