si05101974

Thanks for the info, Yes I have installed the client and can communicate with the device, installed TeamViewer Host msi no issue, it is just .exe and medication management in particular, Miradore reports in progress and state device is processing the action, but does not do anything, I am stumped.

I am using our MDM by Miradore. I know I am missing the correct parameters and the vendor Access have to been able to provide me with them.

Has anyone been able to successfully install Access Medication management .exe, can not find correct parameter required to deploy this software from our MDM, any help appreciated!

Thank you these also did the job: Remove-AppxPackage -AllUsers -Package Microsoft.Copilot_0.4.2.0_neutral__8wekyb3d8bbwe Remove-AppxProvisionedPackage -Online -PackageName Microsoft.Copilot_0.4.2.0_neutral__8wekyb3d8bbwe

Has anyone had and been able to get around the Clonezilla error that occasionally displays when imaging some machine, but not all, error Unable to find target partition "sda1", which in turn stops the imaging process for that machine. Works on most machines, Is it anything to do with the size of partition already on used disk, would a wipe of disk solve it, not sure as do not have one currently to test, any advice on how to resolve this would be appreciated.

I have created a clonezilla image from a machine I have ran SYSPRP on and restored the image to a PC using CloneZillia restore, when it boots I get this message (attached) and hoping someone has a solution please. thanks in advance

Thank you but annoyingly still the same error? Get-AppxPackage Microsoft.Copilot_0.4.2.0_neutral__8wekyb3d8bbwe | Remove-AppxPackage Get-AppxProvisionedPackage -Online | Where-Object {$_.PackageName -eq "Microsoft.Copilot_0.4.2.0_neutral__8wekyb3d8bbwe"} | Remove-AppxProvisionedPackage -Online

Hi I have revisited this and think my brain has died trying to sort this error! Does anyone please have the command to help solve this SYSPRP error please? Any help greatly appreciated thanks 2025-03-25 16:35:31, Error SYSPRP Package Microsoft.Copilot_0.4.2.0_neutral__8wekyb3d8bbwe was installed for a user, but not provisioned for all users. This package will not function properly in the sysprep image.

Hi I have revisited this and think my brain has died trying to sort this error! Does anyone please have the command to help solve this SYSPRP error please? Any help greatly appreciated thanks 2025-03-25 16:35:31, Error SYSPRP Package Microsoft.Copilot_0.4.2.0_neutral__8wekyb3d8bbwe was installed for a user, but not provisioned for all users. This package will not function properly in the sysprep image.

No issue's what so ever here also. We install Sophos stand alone with installer form our cloud account currently, although not for much longer.

Thank you. I have recreated the .wmi file a few times now with same results?

I have built a windows 11 image with the programs and config I wanted. Nothing out of the ordinary. I used Virtual Box to install Windows on, ran SYSPRP and then Any Burn to edit the downloaded iso of Windows 11 24H2, Replaced install.wim file with the one I created from SYSPRP of my VM. Then I used Rufus to burn this image. Windows installs, and then when it reboots and starts to run first boot, I get this error, I have tried changing BIOS settings but same result. Has anyone any ideas please as I am completely stuck.

Tell me about it, however due to restrictions at work, this is our only option, I did put MDT and Fog forward however this is where I'm at. I am hopeful this way will work.

Thanks for your reply. I want to image multiple pc's with this. I can give Clonezilla ago, I have the image I created with Virtual box. I assume I can use that as has all software and config I require on it?

Hi Have created Win 11 image with software installed using Virtual Box and Hirens PE. Then I have used Any Burn to insert the .wim file into windows and then burn the image to bootable USB. When installing the image on a device, it installs Windows all the way through to 100% then fails when trying to reboot. I either get Windows 11 Installation failed with no further details, or this error below, depending on if it is UEFI or Legacy settings in BIOS, but either way, it will not reboot to configure the installation, any Suggestions will be greatly appreciated. Thanks, in advance. Simon

Thanks for all your help, that worked. Had few more errors but was able to use same code with replacing the package. Much appreciated everyone

I am now getting an error about the Language pack for same reason as speech, I can not get same code to run with replacing name of the MS file with the new one, nothing I find on google helps, so hopefully someone out there has the answer for me please! Here is the full cut from Panther from when first SYSPRP error occurs? Microsoft.LanguageExperiencePacken-GB_26100.24.38.0_neutral__8wekyb3d8bbwe was installed for a user, but not provisioned for all users. This package will not function properly in the sysprep image.2025-02-28 10:49:59, Error SYSPRP Failed to remove apps for the current user: 0x80073cf2. 2025-02-28 10:49:59, Error SYSPRP Exit code of RemoveAllApps thread was 0x3cf2. 2025-02-28 10:49:59, Error SYSPRP ActionPlatform::LaunchModule: Failure occurred while executing 'SysprepGeneralizeValidate' from C:\Windows\System32\AppxSysprep.dll; dwRet = 0x3cf2 2025-02-28 10:49:59, Error SYSPRP SysprepSession::Validate: Error in validating actions from C:\Windows\System32\Sysprep\ActionFiles\Generalize.xml; dwRet = 0x3cf2 2025-02-28 10:49:59, Error SYSPRP RunPlatformActions:Failed while validating Sysprep session actions; dwRet = 0x3cf2 2025-02-28 10:49:59, Error [0x0f0070] SYSPRP RunDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = 0x3cf2 2025-02-28 10:49:59, Error [0x0f00d8] SYSPRP WinMain:Hit failure while pre-validate sysprep generalize internal providers; hr = 0x80073cf2 2025-02-28 10:50:01, Info [0x0f0052] SYSPRP Shutting down SysPrep log 2025-02-28 10:50:01, Info [0x0f004d] SYSPRP The time is now 2025-02-28 10:50:01

Thank you both will try these out tomorrow.

Thank you but I am still having the same error of SYSPRP Package MicrosoftWindows.Speech.en-GB.1_1.0.7.0_x64__cw5n1h2txyewy was installed for a user, but not provisioned for all users. This package will not function properly in the sysprep image. It is annoying! Thanks again in advance!

Thank you I shall give it a try and get back to you

Hi Would anyone be able to help, trying run SYSPRP on a Windows 11 build and keep getting this error message and have set windows to create new profiles etc in current UK language, keyboard and rejoin, but still can not get past this error, any help would be greatly appreciated Thanks, Simon Error SYSPRP Package MicrosoftWindows.Speech.en-GB.1_1.0.7.0_x64__cw5n1h2txyewy was installed for a user, but not provisioned for all users. This package will not function properly in the sysprep image.