[wds] WDS over VLAN

[newpersn]

What helpers do i need to put in DNS/DHCP so i can reimage computers over the VLANs, We just moved our server over, and i cant thing of what i need to put in.

 

Any help.

[alttab]

What helpers do i need to put in DNS/DHCP so i can reimage computers over the VLANs, We just moved our server over, and i cant thing of what i need to put in.

 

Any help.

 

ipforwarding and ip-helper should be enabled at the switch level if your in a multi-VLAN environment. consult your switch vendors documentation or vendors' dhcp whitepapers on the commands required.

[newpersn]

Wouldnt be anything to do with these settings?

[Duke5A]

Wouldnt be anything to do with these settings?[ATTACH=CONFIG]15000[/ATTACH]

 

It shouldn't, no; as long as your WDS server hostname is registered in DNS you're fine as far as the DHCP scope options. As long as you can get DHCP into your new VLAN it should just work.

 

I'm going to assume a Cisco switching setup for this... The ip helper-address command needs to be set in the VLAN interface on the switch. It should point to the IP of your DHCP server. Whoever setup your new VLAN in the switching configs should be able to do this for you.

[oxide54]

or use a dhcp relay agent, (