rush_tech Posted June 15, 2007 Posted June 15, 2007 We have a ever increasing amount of laptop power supplies that are faulty. How does everyone else dispose of theres? is it a case of paying for disposal? thanks in advance
Ric_ Posted June 18, 2007 Posted June 18, 2007 How would you normally get rid of a plastic box containing a magnet and a coil of wire?
rush_tech Posted June 18, 2007 Author Posted June 18, 2007 I was told that you can't just bin them. Is this not the case?
elsiegee40 Posted June 18, 2007 Posted June 18, 2007 It depends on the contractor emptying your bins I suspect. I have a long list pinned to my wall about what I can and can't put in the bin.
Wildebeaste Posted June 18, 2007 Posted June 18, 2007 They'll be covered under the WEEE regulations from July 1st won't they? And as schools are businesses we must comply. Dti guidance: http://www.dti.gov.uk/files/file37923.pdf They'll still electrical equipment - and they don't just have a magnet and a coil in them. Until the 1st of July, it seems that you can stick them in any old hole in the ground - assuming someone'll let you, but that's not the point, surely? We've been asked to recycle things properly - we just need to find someone willing to take 'bits' of computers (hopefully for nothing), as well as whole ones - old motherboards, hard drives, network cards etc and a job lot of about 50 knackered laptop power supplies.
garthsmojo Posted June 26, 2007 Posted June 26, 2007 We use a company called LCWS who take all IT equipment as well as cables chargers curcuit boards etc. www.lcws.co.uk you can contact them on 01254 726303
FN-GM Posted October 16, 2007 Posted October 16, 2007 Just put two in the bin a week they won't go looking for them unless they see a large amount of them, they will soon be gone.
maniac Posted October 16, 2007 Posted October 16, 2007 We're still sneaking all sorts into our bins, we've never been 'officially' told that we can't, so we still do. I'm not even sure if anyone else in my school besides me is even aware of the WEEE regualtions. Mike.
localzuk Posted October 16, 2007 Posted October 16, 2007 Collect all your electrical waste up and hire a WEEEEEE contractor to come and collect it once every so often. That's what I do.
davepettymcp Posted October 17, 2007 Posted October 17, 2007 Hi all I would be happy to take your faulty laptop power supply's if you dont mind posting them.
Ric_ Posted October 17, 2007 Posted October 17, 2007 Hi all I would be happy to take your faulty laptop power supply's if you dont mind posting them. Why? 8O
FN-GM Posted October 17, 2007 Posted October 17, 2007 might be for learning purposes maybe he or a class want to pull them apart and take a look what they are made out of.
davepettymcp Posted October 18, 2007 Posted October 18, 2007 I am running an ICT hardware class, I will let the students take them apart and try and fix, they can have a play with the multimeters etc.
srochford Posted October 18, 2007 Posted October 18, 2007 Do be careful!! Most laptop supplies will expose the mains when taken to pieces so there's not much you can do without risking death :-)
K.C.Leblanc Posted October 18, 2007 Posted October 18, 2007 The guide lines we followed at a factory I used to work at (I used to make Condom venders) was that nothing containing a printed curcuit board could be dispossed of in normal rubbish.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now