[for sale] HP ProCurve 4108GL switch - with Modules

[robknowles]

Hello,

 

After replacing our core switch over the summer we have a HP ProCurve Switch with some modules available.

 

- Single Power Supply (does support dual power supplies I believe)

- 3 Modules with 6 x Mini-GBIC Ports per module

- 3 Modules with 20 x Gigabit Copper and 2 x Mini-GBIC Ports per module

- Will also provide 4 x 1Gbits/s Fibre Short-range Transceivers that fit into the Mini-GBIC Ports.

 

Works fine. The only thing is that from when we originally had it the fault light and power light were wired the wrong way - but looking on the web console or telnet port reveals that it is fine.

 

Looking at around £450 although I'm open to offers.

 

If you can collect then even better (we are in the West Midlands area - Sutton Coldfield) or I should be able to post for around £10-£15 depending on where you are - although it's likely I will have to wait until September - we all know what courier firms are like for school deliveries/collection over the summer!

 

Thanks,

 

Rob

[AceDaz]

Have You had any offers for this?

 

Ours is being replaced soon, we have both a 4108 and a 4104.

 

Hello,

 

After replacing our core switch over the summer we have a HP ProCurve Switch with some modules available.

 

- Single Power Supply (does support dual power supplies I believe)

- 3 Modules with 6 x Mini-GBIC Ports per module

- 3 Modules with 20 x Gigabit Copper and 2 x Mini-GBIC Ports per module

- Will also provide 4 x 1Gbits/s Fibre Short-range Transceivers that fit into the Mini-GBIC Ports.

 

Works fine. The only thing is that from when we originally had it the fault light and power light were wired the wrong way - but looking on the web console or telnet port reveals that it is fine.

 

Looking at around £450 although I'm open to offers.

 

If you can collect then even better (we are in the West Midlands area - Sutton Coldfield) or I should be able to post for around £10-£15 depending on where you are - although it's likely I will have to wait until September - we all know what courier firms are like for school deliveries/collection over the summer!

 

Thanks,

 

Rob

[plexer]

I will also have a couple of 4108GL's available once I install the 5308XL I'm getting from a member.

 

I have to say considering the age of these units now I think your pricing is high.

 

Ben

[gavlar]

Hey I know this is an old thread but i was wondering if any of you still have any of the 4108GL's. I'd like to put a few extra modules in the one i have here.

 

Thanks

Gav

[Linfit]

Gavlar, we have a 4108GL sitting in our server room, was working fine when it was taken out of our old building last summer.

Its got redundant PSU's, four 6 port mini GBIC modules, three 20 port Gigabit copper modules (the ones with 2 mini GBIC ports onboard).

We also have about 16 GBIC modules that work with it.

 

If you are interested please PM me.