Fog erroring after 5%

[jamesrobinson]

I am running fog 0.32 and everything was working fine got it all set up and working imaged a few computers, went to do some more yesterday and it started as normal but then came up with an error about input/output error. and now the pcs wont image at all. really stuck and could do with some advice. thanks.

 

This is the error

 

ntfs_mst_post_read_fixup: Invalid argument

Record 0 has no FILE magic (0x0)

Failed to load $MFT: Input/output error

Failed to mount '/dev/sda2': Input/output error

NTFS is either inconsistent, or there is a hardware fault, or it's a

SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows

then reboot into Windows twice. The usage of the /f parameter is very

important! If the device is a SoftRAID/FakeRAID then first activate

it and mount a different device under the /dev/mapper/ directory, (e.g.

/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation

for more details.

Edited August 10, 2011 by jamesrobinson

[Coopeh]

Reading: [ubuntu] NTFS drive won't mount in 9.04 - Ubuntu Forums

 

Looks as though it might be a problem with Ubuntu not understanding the drive is an NTFS drive. Does this happen on all images or just a certain one?

 

I'd try the information in the link above, mainly:

 

sudo apt-get install ntfs-config

 

That will probably already be installed with FOG though.

 

Also try running CHKDSK /F on the image before you upload it to FOG, there maybe some corruption on it.

Edited August 10, 2011 by Coopeh
Extra information

[jamesrobinson]

its doing it with images that have worked on same spec pcs aswell. il take a look at the link, dont understand why its doing it though when it was working fine before.

[Coopeh]

I'd recommend running through the fog-installer.sh again to make sure you have all dependencies installed and all permissions are correct.