adamf Posted July 27, 2011 Posted July 27, 2011 I'm trying to get multicast routing working on our core switch (a HP 5406zl) an struggling big time. We have a premium license for the switch and I think I have configured it all correctly but when I attempt to image machines using SCCM (which is all setup for multicast), I cannot image anything of a different VLAN to the server. If I connect a client to the same VLAN as the server I have no problems. This is the config output from the switch: ; J8697A Configuration Editor; Created on release #K.15.03.0007 hostname "Core Switch" module 1 type J8706A module 2 type J8702A module 3 type J8702A module 4 type J9537A interface A1 name "Server Trunk" speed-duplex 1000-full exit interface A2 name "Server Trunk" speed-duplex 1000-full exit interface A3 name "Server Trunk" speed-duplex 1000-full exit interface A4 name "Orion (Grd)" speed-duplex 1000-full lacp Passive exit interface A5 speed-duplex 1000-full exit interface A6 name "Pho/Peg" speed-duplex 1000-full exit interface A7 speed-duplex 1000-full exit interface A8 name "Science" speed-duplex 1000-full lacp Passive exit interface A9 speed-duplex 1000-full lacp Passive exit interface A10 speed-duplex 1000-full exit interface A11 speed-duplex 1000-full exit interface A12 name "Aquila (Mez)" speed-duplex 1000-full exit interface A13 name "IV Trunk" speed-duplex 1000-full exit interface A14 name "IV Trunk" speed-duplex 1000-full lacp Passive exit interface A15 name "Mackay" speed-duplex 1000-full exit interface A16 name "6th Form (Old)" exit interface A17 speed-duplex 1000-full exit interface A19 speed-duplex 1000-full exit interface A20 speed-duplex 1000-full exit interface A21 speed-duplex 1000-full exit interface A22 speed-duplex 1000-full exit interface B21 speed-duplex 100-full exit interface B23 speed-duplex 100-full exit interface C1 no power-over-ethernet exit interface C7 speed-duplex auto-1000 exit interface D1 speed-duplex 1000-full exit interface D2 speed-duplex 1000-full exit interface D3 speed-duplex 1000-full exit interface D4 speed-duplex 1000-full exit interface D5 speed-duplex 1000-full exit interface D6 speed-duplex 1000-full exit trunk A1-A3 Trk1 Trunk trunk A13 Trk3 Trunk ip routing vlan 1 name "DEFAULT_VLAN" untagged A24,C10,C22 ip helper-address 10.59.100.9 ip helper-address 10.59.100.10 no untagged A4-A12,A14-A23,B1-B24,C1-C9,C11-C21,C23-C24,D1-D24,Trk1,Trk3 no ip address ip igmp exit vlan 10 name "SERVERS" untagged B6,B8-B9,B11,B21,B23,C11-C12 ip helper-address 10.59.100.9 ip helper-address 10.59.100.10 ip address 10.59.100.6 255.255.255.192 tagged Trk1 ip proxy-arp ip igmp exit vlan 20 name "COLLEGE VI" untagged Trk3 ip helper-address 10.59.100.9 ip helper-address 10.59.100.10 ip address 10.59.101.1 255.255.255.0 ip proxy-arp ip igmp exit vlan 60 name "LIB/MEZ/COLLEGE VI WIRELESS" untagged A14,B15,C5 ip helper-address 10.59.100.9 ip helper-address 10.59.100.10 ip address 10.59.99.1 255.255.255.128 tagged A12,A16,A18 ip proxy-arp ip igmp exit vlan 70 name "CPA(DT)" untagged A19-A20 ip helper-address 10.59.100.9 ip helper-address 10.59.100.10 ip address 10.59.99.129 255.255.255.128 ip proxy-arp ip igmp exit vlan 80 name "SCIENCE/MKAY" untagged A8,A15 ip helper-address 10.59.100.9 ip helper-address 10.59.100.10 ip address 10.59.103.1 255.255.255.0 ip proxy-arp ip igmp exit vlan 90 name "ORION" untagged A4-A5,A22,B19,B22,C3,C6 ip helper-address 10.59.100.9 ip helper-address 10.59.100.10 ip address 10.59.102.1 255.255.255.0 tagged A16 ip proxy-arp ip igmp exit vlan 100 name "AQUILA" untagged A10,B1-B2,C7,C21 ip helper-address 10.59.100.9 ip helper-address 10.59.100.10 ip address 10.59.97.1 255.255.255.0 tagged A11-A12,A18 ip proxy-arp ip igmp exit vlan 110 name "PHO/PEG" untagged A6-A7,A9 ip helper-address 10.59.100.9 ip helper-address 10.59.100.10 ip address 10.59.98.1 255.255.255.128 ip proxy-arp ip igmp exit vlan 130 name "PHO/PEG(2)" untagged A17 ip helper-address 10.59.100.9 ip helper-address 10.59.100.10 ip address 10.59.98.129 255.255.255.128 ip proxy-arp ip igmp exit vlan 200 name "ADMIN" no ip address ip proxy-arp exit vlan 140 name "CENTRAL" untagged A21,A23,B3-B5,B7,B10,B12-B14,B16-B17,B20,B24,C2,C8-C9,C13-C16,C23-C24 ip helper-address 10.59.100.9 ip helper-address 10.59.100.10 ip address 10.59.96.1 255.255.255.0 tagged Trk1 ip proxy-arp ip igmp exit vlan 500 name "CCTV" forbid A8 untagged B18,C1,C4,C17-C20,D1-D24 ip address 172.16.1.1 255.255.255.0 tagged A11,A16 exit no fault-finder bad-driver no fault-finder bad-transceiver no fault-finder bad-cable no fault-finder too-long-cable no fault-finder over-bandwidth no fault-finder broadcast-storm no fault-finder loss-of-link no fault-finder duplex-mismatch-hdx no fault-finder duplex-mismatch-fdx no fault-finder link-flap power-over-ethernet pre-std-detect sntp server priority 1 10.59.100.7 no ip ssh ip timep manual 10.59.100.7 ip route 0.0.0.0 0.0.0.0 10.59.100.1 ip route 10.62.0.0 255.255.255.0 10.62.0.1 ip multicast-routing router rip redistribute connected exit router pim exit interface C1 rate-limit all in percent 10 rate-limit all out percent 10 exit snmp-server community "public" unrestricted snmp-server community "spiceworks" operator snmp-server host 10.59.100.51 community "public" snmp-server host 10.59.100.23 community "public" snmp-server host 10.59.100.47 community "spiceworks" snmp-server host 10.59.100.28 community "public" snmp-server contact "Adam Ed Jerry Reece" location "Comms Room" spanning-tree Trk1 priority 4 spanning-tree Trk3 priority 4 vlan 10 ip rip 10.59.100.6 ip pim-dense ip-addr any exit exit vlan 20 ip rip 10.59.101.1 ip pim-dense ip-addr any exit exit vlan 60 ip rip 10.59.99.1 ip pim-dense ip-addr any exit exit vlan 70 ip rip 10.59.99.129 ip pim-dense ip-addr any exit exit vlan 80 ip rip 10.59.103.1 ip pim-dense ip-addr any exit exit vlan 90 ip rip 10.59.102.1 ip pim-dense ip-addr any exit exit vlan 100 ip rip 10.59.97.1 ip pim-dense ip-addr any exit exit vlan 110 ip rip 10.59.98.1 ip pim-dense ip-addr any exit exit vlan 130 ip rip 10.59.98.129 ip pim-dense ip-addr any exit exit vlan 140 ip rip 10.59.96.1 ip pim-dense ip-addr any exit exit password manager The sevrer is joined to the servers VLAN and i've been trying to image clients in the AQUILA VLAN. Can anybody see what might be wrong?
IanT Posted July 27, 2011 Posted July 27, 2011 I've just deployed a 5406zl and above looks okay. Take a look at this: http://cdn.procurve.com/training/Manuals/3500-5400-6200-8200-MRG-Jan08-2-IGMP.pdf Also have you enabled IGMP on the edge switches where you multicasting from? see below: vlan 20 name servers tagged 45-48 ip igmp exit you need to enable this for each vlan on the edge switches
adamf Posted July 28, 2011 Author Posted July 28, 2011 Yep that is set of all VLANs on the edge switches. I'm having trouble across VLANS when the server and client are both plugged into the 5406zl
andyrite Posted July 28, 2011 Posted July 28, 2011 I've got multicast routing working and the config looks the same. I think I had to reboot the switch after enabling multicast-routing to get it to work.
adamf Posted July 28, 2011 Author Posted July 28, 2011 I've just upgraded to the latest firmware which caused a reboot and I still can't get it to work. Any more ideas?
rbance Posted September 5, 2011 Posted September 5, 2011 Did you get this sorted? From the config it looks like IGMP is enabled....ports tagged and untagged seem ok..I think... querier enabled??? I will recheck my config tomorrow....
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now