Jump to content

Recommended Posts

Posted

What are you going to use them for and over what distances?

 

The Zyxel ones are the same generic brand that are available from several outlets but the prices vary enormously.

 

For phones and low power Access points they will be fine but avoid using the cheaper units on some higher rated AP's as they just dont have the juice required.

15.4w is the normal 802.af output but some devices like the Cisco Dual Bands want 17w and refuse to work with the cheaper brands.

 

The other thing to watch out for is Gigabit compatability, as you will know Gigabit uses all 8 wires in your CAT5 cable and the cheaper POE units are 10/100 only and will give your gigabit switch a headache and you a nightmare unless you are expecting it!

 

802.3af and 802.3at are the different standards to look out for,

 

If you need any more info drop me a PM...

  • Thanks 1
Posted
PowerDsine/Microsemi are the PoE injectors/PoE midpans to get :). They provide their products OEM to lots of companies and produce the components for lots of the PoE switches out there. Lots of different options from single port upto 24 port and both 802.3af and 802.3at as well as gigabit compatibility - Manufacture Diodes, IGBTs, LED Driver, Small Signal & Analog, RF Power, SCR, WLAN Power Amplifier, Backlight Inverter, CCFL Inverter, Power Modules, RF Transistors, Power Over Ethernet, PoE, PoE IC

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...