[boot cd] How can i create a multi netword card boot disk for CC3

[jsharrock]

Hi All and thanks for reading.

I want to create a boot disk for a CC3 network but to incorperate variuose network cards from variouse machines.

I would like it to autodetect which card is in the machine and to be able to go through the build by having the dos drivers on the boot disk and the windows drivers on the server.

has anyone done this?

I seem to be able to get the dos drivers on the boot disk but i then have to choose which one but even though i am placing the windows files on the server when creating the disk image half way through the build it does not install the windows nic driver and the build fails.

hope that all makes sence.

Thanks.

jon

[featured_spectre]

Best bet is to create a disk that has all the drivers, or create several specific disks based on your drivers. I personally would go for option 1 as it should auto detect and install from the set you have.

[jsharrock]

I was wanting to know how to create the disk in the first place, I'm a newby here and have very limited experiance with CC3 so if you have any instructions from start to finish that would be great.

Cheers